FC1325AG - Single Chip USB Flash Drive Controller

FC1325AG Datasheet Preview — Preview of FC1325AG PDF

Datasheet Details

Part number	FC1325AG
Manufacturer	Key Technology
File Size	511.54 KB
Description	Single Chip USB Flash Drive Controller
Datasheet	FC1325AG_KeyTechnology.pdf

FC1325AG Product details

Description

: The KTC-FC1325AG single chip controller is designed for the high capacity and high performance USB Interface Flash Drives.The controller is fully compatible with USB 1.1/2.0 interface, and support the USB Mass Storage Command Protocol.The controller can support HDD/FDD function via one switch.Besides, the controller can set LED Flashing type via MP software.The controller (LQFP 64) support up to 8 Renesas 1-Gbit AGAND type Flash Memory devices without any additional circuit.

Features

1. USB Interface: 1) Support Standard USB (Universal Serial Bus) interface. 2) Fully compatible with USB Spec. 1.1/2.0 3) Support USB Mass Storage Command Protocol. 4) High Speed (480 Mbits/sec), Full Speed (12 Mbits/sec) and Low Speed (1.5 Mbits/sec) transfer support. 5) 4 End points support: Control, Interrupt, Bulk-In, and Bulk-Out. 6) Dual 64 Bytes FIFO for Bulk In, Bulk Out Data Transfer. 7) USB Power saving support. 2. Error Correction Logic: 1) Data Interleave to 2 for each 256 Bytes. 2.

📁 FC1325AG Similar Datasheet

FC132 - NPN Transistor (Sanyo Semicon Device)
FC13 - N-Channel FET (Sanyo Semicon Device)
FC130 - NPN Transistor (Sanyo Semicon Device)
FC131 - PNP Transistor (Sanyo Semicon Device)
FC133 - PNP Transistor (Sanyo Semicon Device)
FC134 - NPN Transistor (Sanyo Semicon Device)
FC135 - PNP Transistor (Sanyo Semicon Device)
FC136 - NPN Transistor (Sanyo Semicon Device)

Other Datasheets by Key Technology

FC1306T - Single Chip Controller

Published: May 10, 2007 |