900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






King blillion Electronics

HE83116B Datasheet Preview

HE83116B Datasheet

8-BIT MICRO-CONTROLLER

No Preview Available !

KING BILLION ELECTRONICS CO., LTD
A.HE83116B Introduction
HE83116B
HE80000 SERIES
HE83116B is a member of 8-bit Micro-controller series developed by King Billion Electronics Ltd. This
IC build-in 128-dot LCD driver, and also have 16-bit I/O port. The built-in OP comparator can be used
with (light voice temperature humility) sensor and used as battery low detection. And the 7-bit
current-type D/A converter and PWM device provide the complete speech output mechanism. The 64K
ROM Size can be used in the storage of speech (20 seconds at 3Kbytes per second), graphic, text etc. This
IC is applicable to the small systems such as calculating machine, perpetual calendar, digital watch etc..
The instruction set of HE83116B are quite easy to learn and simple to use. Only about thirty instructions
with four-type addressing mode are provided. Most of instructions take only 3 oscillator clocks (machine
cycles). The processing power is enough to most of battery operation system.
B.HE83116B Features
Operation Voltage
2.4V – 5.5V
System Clock
DC ~ 8MHz @ 5.0V
DC ~ 4MHz @ 2.4V
Internal ROM
64K Bytes(64K Program ROM)
Internal RAM
256 Bytes.
Dual Clock System
Normal (Fast) clock 32.768K ~ 8MHz
Slow clock
32.768KHz
Operation Mode
DUAL FAST SLOW IDLE SLEEP Mode.
With WDT (WATCH DOG TIMER) to prevent deadlock condition..
16 bit Bi-directional I/O port. Mask Option can select PUSH-PULL or OPEN DRAIN output mode
for each I/O pin.
One built-in OP comparator.
128 dots LCD driver (A B TYPE selectable).
One 7-bit current-type DAC output.
PWM device.
Two external interrupts and two internal timer interrupts.
Two 16-bit timer.
Instruction set 32 instructions, 4 addressing mode. 8-bit DATA POINTER for RAM and 16-bit
TABLE POINTER for ROM.
C. Internal Blockwww.DataSheet4U.com
Please always take in mind that ICE is different from IC. ICE is the whole set of HE80000 series IC, but
each IC is a subset of ICE. Never use any hardware resource that real IC didn't have, especially RAM and
register. KBIDS and compiler cannot prevent user to use some hardware resource that didn't exist. Please
check the following table and refer the abbreviation in HE80000 user's manual.
1 V3.1E




King blillion Electronics

HE83116B Datasheet Preview

HE83116B Datasheet

8-BIT MICRO-CONTROLLER

No Preview Available !

KING BILLION ELECTRONICS CO., LTD
HE83116B
HE80000 SERIES
I.F.C.
DAO
E.S.C. I.P.R
OP PWM
PROM
64KB
LCD
128
DROM TP TP+1 RAM PP DP
— 16-bit
256B — 8-bit
COM*SEG Bias Rgr ChrgPmp LV2
4*32
1/3 — 1,3/2,3
I/O DTMF WDT Timer
16 —
T1,T2
LR LVG REC S.R.
—— — —
D. Pin Description
Pin # Pin name I/O
Function
Description
55 FXI,
54 FXO
External fast clock pin. Mask option setting
B, Connecting to crystal or RC MO_FCK/SCKN= 00 Slow Clock only
O
to generate 32.768
8MHz frequency.
kHz
~ 01
10
Illegal
Dual Clock
11 Fast Clock only
MO_FOSCE = 0 Internal fast osc.
58 SXI,
57 SXO
External slow clock pin.
= 1 External fast osc.
Connecting with 32768 Hz MO_FXTAL= 0 RC osc. for fast clock
I,
O
crystal or resistor as slow
clock and providing clock
source for LCD display,
TIMER1, Time-Base and
other internal blocks.
= 1 X’tal osc. for fast clock
MO_SXTAL= 0 RC for 32768 Hz clock
= 1 X’tal for 32768 Hz clock
Use OP1 and OP2 to switch among different operation
mode (NORMAL, SLOW, IDEL and SLEEP). In Dual
Clock mode, the main system clock is still the Fast Clock.
The 32768 Hz clock is for LCD and Timer 1 only.
Level trigger, active low. Except for using this pin, using
mask option (MO_PORE=1) could enable IC build-in
53 RSTP_N I System Reset.
power-on reset circuit.
Besides, MO_WDTE can set Watch Dog Timer
MO_WDTE=0 Disable Watch Dog Timer
=1 Enable Watch Dog Timer
56 TSTP_P
I Test Pin
Please bond this pin and add a test point on PCB for
debugging. Leave this pin floating is OK.
Mask options
68..71
1..4
PRTC[7:0]
B
8-pin
port.
bi-directional
I/O
MO_CPP[7..0]=1
=0 ~ Open-drain.
~
Push-pull.
Output must be “1” before reading whenever use them as
input (No tri-state structure).
8-pin bi-directional I/O Mask options
60..67 PRTD[7:0] B
port. PRTD[7..2] as MO_DPP[7..0]=1 ~ Push-pull.
wake-up pin.
=0 ~ Open-drain.
PRTD[7..6] as external Output must be “1” before reading whenever use them as
interrupt pin.
input (No tri-state structure).
39..42 COM[3:0] O LCD COMmon Output
7..38 SEG[31:0] O LCD SEGment Output
LCD Data filled from F0H, please refer the LCD RAM
map.
www.Dat44a43Sheet4LLUCC.c21om
B Charge Pump Switch 2
B Charge Pump Switch 1
Add one 0.1 µF capacitor between LC1 and LC2. Please refer
the application circuit.
45 L V3
46 L V2
48 L V1
B Charge Pump V3
B Charge Pump V2
B Charge Pump V1
LV3< 9 Volts.
Please refer the application circuit.
5 PWMP
The PWM positive output
O can drive speaker or buzzer Set the bit2 of VOC register as one to turn on PWM.
directly.
2 V3.1E


Part Number HE83116B
Description 8-BIT MICRO-CONTROLLER
Maker King blillion Electronics
Total Page 9 Pages
PDF Download

HE83116B Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 HE83116B 8-BIT MICRO-CONTROLLER
King blillion Electronics





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy