900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Kingbright

AA2214ZGS-AMT Datasheet Preview

AA2214ZGS-AMT Datasheet

SMD LED

No Preview Available !

ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z High reliability LED package.
z 2.2mm x 1.4mm, 1.3mm high.
z Low power consumption.
z Available on tape and reel.
z Package : 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
Package Dimensions
2.2x1.4mm SURFACE MOUNT LED LAMP
Part Number: AA2214ZGS-AMT
Green
Description
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Applications
z Traffic signaling.
z Backlighting (illuminated advertising , general lighting).
z Interior and exterior automotive lighting.
z Substitution of micro incandescent lamps.
z Reading lamps.
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. Steps, exit ways, etc).
z Decorative and entertainment lighting.
z Indoor and outdoor commercial and residential
architectural lighting.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAL4010
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: NOV/22/2010
DRAWN: C.H.HAN
PAGE: 1 OF 7
ERP: 1201007406




Kingbright

AA2214ZGS-AMT Datasheet Preview

AA2214ZGS-AMT Datasheet

SMD LED

No Preview Available !

Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAL4010
APPROVED: WYNEC
REV NO: V.1
CHECKED: Allen Liu
DATE: NOV/22/2010
DRAWN: C.H.HAN
PAGE: 2 OF 7
ERP: 1201007406


Part Number AA2214ZGS-AMT
Description SMD LED
Maker Kingbright
Total Page 3 Pages
PDF Download

AA2214ZGS-AMT Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 AA2214ZGS-AMT SMD LED
Kingbright





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy