3.5 x 2.8 mm Surface Mount LED Lamp
The Green source color devices are made with
InGaN on Sapphire Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
Suitable for all SMD assembly and solder process
Available on tape and reel
Ideal for backlighting
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Home and smart appliances
Wearable and portable devices
Observe precautions for handling
electrostatic discharge sensitive devices
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
■ Green (InGaN)
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2017 Kingbright. All Rights Reserved. Spec No: DSAO7065 / 1201009154 Rev No: V.2B Date: 05/05/2017
Iv (mcd) @ 2mA 
Viewing Angle 
Page 1 / 4