900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Kingbright

AA3535SYL1Z1S Datasheet Preview

AA3535SYL1Z1S Datasheet

SMD LED

No Preview Available !

ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z White SMD package, silicone resin.
z Low thermal resistance.
z Compatible with IR-reflow processes.
z ESD protection.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 2a.
z RoHS compliant.
Package Dimensions
3.5x3.5 mm SMD CHIP LED LAMP
Part Number: AA3535SYL1Z1S
Super Bright Yellow
Descriptions
z The source color devices are made with AlGaInP Light
Emitting Diode.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipments and machineries must be
electrically grounded.
Applications
z Signal and symbol luminaire for orientation.
z Marker lights (e.g. steps, exit ways, etc).
z Decorative and entertainment lighting.
z Commercial and residential lighting.
z Automotive interior lighting.
Recommended Soldering Pattern
(Units : mm; Tolerance: ±0.1)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAJ4025
APPROVED: WYNEC
REV NO: V.9B
CHECKED: Allen Liu
DATE: AUG/02/2014
DRAWN: L.Q.Xie
PAGE: 1 OF 6
ERP: 1201007946




Kingbright

AA3535SYL1Z1S Datasheet Preview

AA3535SYL1Z1S Datasheet

SMD LED

No Preview Available !

Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might lead to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or
damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks.
4.2. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
4.3. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
5. As silicone encapsulation is permeable to gases, some corrosive substances such as H2S might corrode silver plating of
leadframe. Special care should be taken if an LED with silicone encapsulation is to be used near such substances.
SPEC NO: DSAJ4025
APPROVED: WYNEC
REV NO: V.9B
CHECKED: Allen Liu
DATE: AUG/02/2014
DRAWN: L.Q.Xie
PAGE: 2 OF 6
ERP: 1201007946


Part Number AA3535SYL1Z1S
Description SMD LED
Maker Kingbright
Total Page 3 Pages
PDF Download

AA3535SYL1Z1S Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 AA3535SYL1Z1S SMD LED
Kingbright





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy