AA5630UMW46-W2
AA5630UMW46-W2 is SMD LED manufactured by Kingbright.
Features z Size (mm): 5.6 x 3.0 x 0.77 z Suitable for all SMT assembly and solder process. z Available on tape and reel. z White SMD package, silicone resin. z Moisture sensitivity level : level 2a. z Ro HS pliant.
Package Dimensions
5.6mm x 3.0mm SURFACE MOUNT LED
Part Number: AA5630UMW46-W2 Warm White
Descriptions z The source color devices are made with In Ga N on Sapphire-substrate Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is remended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded.
Applications z LCD TV / Monitor Backlight. z Architectural lighting. z Decorative lighting.
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAN0336 APPROVED: WYNEC
REV NO: V.5B CHECKED: Allen Liu
DATE: SEP/01/2014 DRAWN: Y.Liu
PAGE: 1 OF 9 ERP: 1201008609
Handling Precautions pare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to ply might lead to damage and premature failure of the LED. 1. Handle the ponent along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Impact may scratch the silicone lens or damage the internal circuitry.
4.1. The inner diameter of the SMD pickup nozzle should not exceed the...
