AAAF5051-04 Datasheet | Kingbright

Features z Chips can be controlled separately. z Suitable for all SMT assembly and solder process. z Available on tape and reel. z White SMD package, silicone resin. z Package: 500pcs / reel. z Moisture sensitivity level : level 3. z Ro HS pliant. Package Dimensions 5.0mm x 5.0mm FULL-COLOR SURFACE MOUNT LED LAMP Part Number: AAAF5051-04 Blue Reddish-Orange Green Descriptions z The Blue source color devices are made with In Ga N on Al2O3 substrate Light Emitting Diode. z The Reddish-Orange source color devices are made with Al Ga In P on Al N substrate Light Emitting Diode. z The Green source color devices are made with In Ga N on Al2O3 substrate Light Emitting Diode. z Electrostatic discharge and power surge could damage the LEDs. z It is remended to use a wrist band or antielectrostatic glove when handling the LEDs. z All devices, equipments and machineries must be electrically grounded. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.15[±0.006]unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAM7047 APPROVED: WYNEC REV NO: V.4B CHECKED: Allen Liu DATE: SEP/16/2014 DRAWN: L.Q.Xie PAGE: 1 OF 9 ERP : 1201008410 Handling Precautions pare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to ply might lead to damage and premature failure of the LED. 1. Handle the ponent along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack...