900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Kingbright

AP1608SYCK Datasheet Preview

AP1608SYCK Datasheet

SMD LED

No Preview Available !

ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z 1.6mmX0.8mm SMD LED, 1.1mm thickness.
z Low power consumption.
z Wide viewing angle.
z Ideal for backlight and indicator.
z Package: 2000pcs / reel.
z Moisture sensitivity level : level 3.
z RoHS compliant.
1.6X0.8mm SMD CHIP LED LAMP
Part Number: AP1608SYCK
Super Bright Yellow
Descriptions
z The Super Bright Yellow device is made with AlGaInP (on
GaAs substrate) light emitting diode chip.
z Electrostatic discharge and power surge could damage
the LEDs.
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs.
z All devices, equipment and machinery must be electri
cally grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3.The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.
4.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAB2719
APPROVED: Wynec
REV NO: V.17B
CHECKED: Allen Liu
DATE: FEB/28/2017
DRAWN: W.Q.Zhong
PAGE: 1 OF 5
ERP: 1203000080




Kingbright

AP1608SYCK Datasheet Preview

AP1608SYCK Datasheet

SMD LED

No Preview Available !

Selection Guide
Part No.
Emitting Color (Material)
Lens Type
AP1608SYCK
Super Bright Yellow (AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous Flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min. Typ. 2θ1/2
80
150
120°
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Emitting Color
Typ.
Max.
Units Test Conditions
λpeak
Peak Wavelength
Super Bright Yellow
590
nm
IF=20mA
λD [1]
Dominant Wavelength
Super Bright Yellow
590
nm
IF=20mA
Δλ1/2
Spectral Line Half-width
Super Bright Yellow
20
nm
IF=20mA
C
Capacitance
Super Bright Yellow
20
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
Super Bright Yellow
2
2.5
V
IF=20mA
IR
Reverse Current
Super Bright Yellow
10
uA
VR=5V
Notes:
1. Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or
premature failure.
Absolute Maximum Ratings at TA=25°C
Parameter
Values
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
175
mA
Reverse Voltage
5
V
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref
JEDEC/JESD625-A and JEDEC/J-STD-033.
SPEC NO: DSAB2719
APPROVED: Wynec
REV NO: V.17B
CHECKED: Allen Liu
DATE: FEB/28/2017
DRAWN: W.Q.Zhong
PAGE: 2 OF 5
ERP: 1203000080


Part Number AP1608SYCK
Description SMD LED
Maker Kingbright
Total Page 3 Pages
PDF Download

AP1608SYCK Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 AP1608SYCK SMD LED
Kingbright





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy