AP3216MGC
AP3216MGC is SMD LED manufactured by Kingbright.
FEATURES
3.2 mm x 1.6 mm SMD LED, 1.1 mm thickness Low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Ro HS pliant
APPLICATIONS
Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications
ATTENTION
Observe precautions for handling electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
REMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1)
Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.0079") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications.
SELECTION GUIDE
Part Number
Emitting Color (Material)
Lens Type
- Mega Green (Al Ga In P)
Water Clear
Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2018 Kingbright. All Rights Reserved. Spec No: DSAA8436 / 1203000359 Rev No: V.13B Date: 11/26/2018
Iv (mcd) @ 20m A [2]
Min.
Typ.
Viewing Angle [1] 2θ1/2
140°
Page 1 / 4
ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20m A
Dominant Wavelength IF = 20m A Spectral Bandwidth at 50% Φ REL MAX IF = 20m A Capacitance
Forward Voltage IF = 20m A
λpeak λdom [1]
Δλ C VF [2]
Mega Green Mega Green Mega Green Mega Green Mega Green
Reverse Current (VR = 5V)
Mega Green
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. ) 2. Forward voltage: ±0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than remended...
