3.0 x 1.0 mm Right Angle SMD Chip LED Lamp
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
The Green source color devices are made with InGaN
on Sapphire Light Emitting Diode
The Blue source color devices are made with InGaN
Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
3.0 x 1.5 x 1.0 mm right angle SMD LED, 1.0 mm
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Tinned pads for improved solderability
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
Home and smart appliances
Wearable and portable devices
Observe precautions for handling
electrostatic discharge sensitive devices
■ Hyper Red
■ Green (InGaN)
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
Iv (mcd) @ 20mA 
Viewing Angle 
■ Blue (InGaN)
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
3. Luminous intensity value is traceable to CIE127-2007 standards.
© 2020 Kingbright. All Rights Reserved. Spec No: DSAO2062 / 1203013228 Rev No: V.6B Date: 03/26/2020
Page 1 / 4