APTB1612SURKQWDF Datasheet | Kingbright

APTB1612SURKQWDF 1.6 x 1.25 mm Bi-Color SMD Chip LED Lamp DESCRIPTIONS The Hyper Red source color devices are made with Al Ga In P on Ga As substrate Light Emitting Diode The source color devices are made with In Ga N Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is remended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded Features 1.6 mm x 1.25 mm SMD LED, 0.65 mm thickness Bi-color, low power consumption Wide viewing angle Ideal for backlight and indicator Package: 2000 pcs / reel Moisture sensitivity level: 3 Ro HS pliant APPLICATIONS Backlight Status indicator Home and smart appliances Wearable and portable devices Healthcare applications ATTENTION Observe precautions for handling electrostatic discharge sensitive devices PACKAGE DIMENSIONS Red White REMENDED SOLDERING PATTERN (units : mm; tolerance : ± 0.1) Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. 4. The device has a single mounting surface. The device must be mounted according to the specifications. SELECTION GUIDE Part Number Emitting Color (Material) Lens Type - Hyper Red (Al Ga In P) White (In Ga N) Yellow Fluorescent Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. - Luminous intensity value is traceable to CIE127-2007 standards. © 2018 Kingbright. All Rights Reserved. Spec No: DSAL1006 / 1203008490 Rev No: V.7A Date: 01/23/2018 Iv (mcd) @ 20m A [2] Min. Typ. 120 200 - 40 - 80 120...