900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Kingbright

KT-2520ZG10ZS Datasheet Preview

KT-2520ZG10ZS Datasheet

SURFACE MOUNT LED LAMP

No Preview Available !

PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Features
z DIMENSION: 2.5mmX 2.0mm X 0.8mm.
z LOW THERMAL RESISTANCE.
z CERAMIC PACKAGE WITH SILICONE RESIN.
z SMALL PACKAGE WITH HIGH EFFICIENCY.
z SURFACE MOUNT TECHNOLOGY.
z ESD PROTECTION.
z PACKAGE : 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 2a.
z RoHS COMPLIANT.
Package Dimensions
2.5X2.0mm SURFACE MOUNT LED LAMP
Part Number: KT-2520ZG10ZS
Green
Application Note
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Typical Applications
PDAs
Room lighting
Architectural lighting
Decorative/pathway lighting
Front panel backlight
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAI2133
APPROVED: WYNEC
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/10/2008
DRAWN: R.Chen
PAGE: 1 OF 6
ERP: 1203007589




Kingbright

KT-2520ZG10ZS Datasheet Preview

KT-2520ZG10ZS Datasheet

SURFACE MOUNT LED LAMP

No Preview Available !

Handling Precautions
Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic
significantly reduces thermal stress, it is more susceptible to damage by external mechanical force.
As a result, special handling precautions need to be observed during assembly using silicone encapsulated
LED products. Failure to comply might leads to damage and premature failure of the LED.
1. Handle the component along the side surfaces by using forceps or appropriate tools.
2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry.
3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or
damage the internal circuitry.
4. The outer diameter of the SMD pickup nozzle should not exceed the size of the LED to prevent air leaks. The inner diameter
of the nozzle should be as large as possible.
5. A pliable material is suggested for the nozzle tip to avoid scratching or damaging the LED surface during pickup.
6. The dimensions of the component must be accurately programmed in the pick-and-place machine to insure precise pickup
and avoid damage during production.
SPEC NO: DSAI2133
APPROVED: WYNEC
REV NO: V.2
CHECKED: Allen Liu
DATE: APR/10/2008
DRAWN: R.Chen
PAGE: 2 OF 6
ERP: 1203007589


Part Number KT-2520ZG10ZS
Description SURFACE MOUNT LED LAMP
Maker Kingbright
Total Page 6 Pages
PDF Download

KT-2520ZG10ZS Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 KT-2520ZG10ZS SURFACE MOUNT LED LAMP
Kingbright





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy