900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Kingbright

WP7113SURC-E Datasheet Preview

WP7113SURC-E Datasheet

SOLID STATE LAMP

No Preview Available !

WP7113SURC/E
T-1 3/4 (5 mm) Solid State Lamp
DESCRIPTIONS
z The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
z Electrostatic discharge and power surge could
damage the LEDs
z It is recommended to use a wrist band or anti-
electrostatic glove when handling the LEDs
z All devices, equipments and machineries must be
electrically grounded
FEATURES
z Low power consumption
z Popular T-1 3/4 diameter package
z General purpose leads
z Reliable and rugged
z Long life - solid state reliability
z Available on tape and reel
z RoHS compliant
APPLICATIONS
z Status indicator
z Illuminator
z Signage applications
z Decorative and entertainment lighting
z Commercial and residential architectural lighting
ATTENTION
Observe precautions for handling
electrostatic discharge sensitive devices
PACKAGE DIMENSIONS
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. The specifications, characteristics and technical data described in the datasheet are subject to change
without prior notice.
SELECTION GUIDE
Part Number
Emitting Color
(Material)
Lens Type
WP7113SURC/E
Hyper Red
(AlGaInP)
Water Clear
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAF2440 / 1101005307 Rev No: V.9A Date: 04/03/2019
Iv (mcd) @ 20mA [2]
Min.
Typ.
Viewing Angle [1]
2θ1/2
4200
7600
20°
*1100
*2100
Page 1 / 5




Kingbright

WP7113SURC-E Datasheet Preview

WP7113SURC-E Datasheet

SOLID STATE LAMP

No Preview Available !

ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C
Parameter
Symbol
Emitting Color
Wavelength at Peak Emission IF = 20mA
Dominant Wavelength IF = 20mA
Spectral Bandwidth at 50% Φ REL MAX
IF = 20mA
Capacitance
λpeak
λdom [1]
Δλ
C
Hyper Red
Hyper Red
Hyper Red
Hyper Red
Forward Voltage IF = 20mA
VF [2]
Hyper Red
Reverse Current (VR = 5V)
IR
Hyper Red
Temperature Coefficient of λpeak
IF = 20mA, -10°C T 85°C
Temperature Coefficient of λdom
IF = 20mA, -10°C T 85°C
Temperature Coefficient of VF
IF = 20mA, -10°C T 85°C
TCλpeak
TCλdom
TCV
Hyper Red
Hyper Red
Hyper Red
Notes:
1. The dominant wavelength (λd) above is the setup value of the sorting machine. (Tolerance λd : ±1nm. )
2. Forward voltage: ±0.1V.
3. Wavelength value is traceable to CIE127-2007 standards.
4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure.
ABSOLUTE MAXIMUM RATINGS at TA=25°C
Parameter
Symbol
Value
WP7113SURC/E
Value
Typ.
Max.
645
-
630
-
25
-
45
-
1.9
2.5
-
10
0.14
-
0.05
-
-1.9
-
Unit
nm
nm
nm
pF
V
µA
nm/°C
nm/°C
mV/°C
Unit
Power Dissipation
PD
75
Reverse Voltage
VR
5
Junction Temperature
Tj
115
Operating Temperature
Top
-40 to +85
Storage Temperature
Tstg
-40 to +85
DC Forward Current
IF
30
Peak Forward Current
IFM [1]
200
Electrostatic Discharge Threshold (HBM)
Thermal Resistance (Junction / Ambient)
Thermal Resistance (Junction / Solder point)
Lead Solder Temperature [3]
-
Rth JA [2]
Rth JS [2]
3000
350
160
260°C For 3 Seconds
Lead Solder Temperature [4]
260°C For 5 Seconds
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. Rth JA ,Rth JS Results from mounting on PC board FR4 (pad size 16 mm2 per pad).
3. 2mm below package base.
4. 5mm below package base.
5. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity – Ref JEDEC/JESD625-A and JEDEC/J-STD-033.
mW
V
°C
°C
°C
mA
mA
V
°C/W
°C/W
© 2019 Kingbright. All Rights Reserved. Spec No: DSAF2440 / 1101005307 Rev No: V.9A Date: 04/03/2019
Page 2 / 5


Part Number WP7113SURC-E
Description SOLID STATE LAMP
Maker Kingbright
Total Page 3 Pages
PDF Download

WP7113SURC-E Datasheet PDF

View PDF for Mobile






Similar Datasheet

1 WP7113SURC-E SOLID STATE LAMP
Kingbright





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy