1.6 x 0.8 mm SMD Chip LED Lamp
The Hyper Red source color devices are made with
AlGaInP on GaAs substrate Light Emitting Diode
Electrostatic discharge and power surge could
damage the LEDs
It is recommended to use a wrist band or
anti-electrostatic glove when handling the LEDs
All devices, equipments and machineries must be
1.6 mm x 0.8 mm SMD LED, 1.1 mm thickness
Low power consumption
Wide viewing angle
Ideal for backlight and indicator
Package: 2000 pcs / reel
Moisture sensitivity level: 3
Home and smart appliances
Wearable and portable devices
Observe precautions for handling
electrostatic discharge sensitive devices
RECOMMENDED SOLDERING PATTERN
(units : mm; tolerance : ± 0.1)
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to
change without prior notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
■ Hyper Red (AlGaInP)
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity / luminous flux: +/-15%.
* Luminous intensity value is traceable to CIE127-2007 standards.
© 2019 Kingbright. All Rights Reserved. Spec No: DSAB2720 / 1203000076 Rev No: V.17A Date: 07/16/2019
Iv (mcd) @ 20mA 
Viewing Angle 
Page 1 / 4