Datasheet4U Logo Datasheet4U.com

ML33111 - Low Voltage Compander Silicon Monolithic Integrated Circuit

General Description

LANSDALE Semiconductor, Inc.

Description Connect to a clean power supply ground.

Output of the compressor section.

Key Features

  • 3.7 0.02.
  • 0.2 % dB kHz nA Vp-p mA VST Rin.
  • tCMLH tCMHL tEMLH tEMHL tPCLH tPCHL tPELH tPEHL.
  • 0 55 2.0 3.0 2.0 3.0 2.0 5.0 6.0 7.0.
  • µs.
  • 1.3.
  • Vdc µA PSRR.
  • tAT(E) tD(E) Rin VbIAS.

📥 Download Datasheet

Datasheet Details

Part number ML33111
Manufacturer LANSDALE Semiconductor
File Size 681.59 KB
Description Low Voltage Compander Silicon Monolithic Integrated Circuit
Datasheet download datasheet ML33111 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML30 TO-220 Power Resistor MAYLOON
ML303 PIN PHOTO DIODE Micro
ML303B PIN PHOTO DIODE Micro
ML308 PIN PHOTO DIODE Micro
ML3101 (ML3xx1) MITSUBISHI LASER DIODES Mitsubishi Electric Semiconductor

Other Datasheets by LANSDALE Semiconductor

Part Number Description
ML3356 Wideband FSK Receiver
ML3371 Low Power Narrowband FM IF
ML3372 Low Power Narrowband FM IF
ML3102 (ML3100 Series) Logic IC
ML310x (ML3100 Series) Logic IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ML33111 www.DataSheet4U.com Low Voltage Compander Silicon Monolithic Integrated Circuit Legacy Device: Motorola MC33111 The ML33111 contains two variable gain circuits configured for compressing and expanding the dynamic range of an audio signal. One circuit is configured as an expander, and the other is configured as a compressor. Each circuit has a full wave rectifier to provide average value information to a variable gain cell located in either the input stage or the feedback path. An internal temperature stable bandgap reference provides the necessary precision voltages. Included in the ML33111 are controls for muting each section independently, and for pass through of both. Two uncommitted op amps are available for peripheral functions.