Datasheet4U Logo Datasheet4U.com

ML8511A - UV Sensor

General Description

The ML8511A is a UV sensor, which is suitable for acquiring UV intensity indoors or outdoors.

The ML8511A is equipped with an internal amplifier, which converts photo-current to voltage depending on the UV intensity.

This unique feature offers an easy interface to external circuits such as ADC.

Key Features

  • Photodiode sensitive to UV-A and UV-B.
  • Embedded operational amplifier.
  • Analog voltage output.
  • Low supply current (300μA typ. ) and low standby current (0.1μA typ. ).
  • Small and thin surface mount package (4.0mm x 3.7mm x 0.73mm, 12-pin ceramic QFN).

📥 Download Datasheet

Datasheet Details

Part number ML8511A
Manufacturer LAPIS
File Size 233.95 KB
Description UV Sensor
Datasheet download datasheet ML8511A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ML8204 (ML8204 / ML8205) Tone Ringer ST Microelectronics
ML8204 (ML8204 / ML8205) Tone Ringer SGS-Thomson
ML8205 (ML8204 / ML8205) Tone Ringer ST Microelectronics
ML8205 (ML8204 / ML8205) Tone Ringer SGS-Thomson
ML8205 Battery protection MEILAI

Other Datasheets by LAPIS

Part Number Description
ML8511 UV Sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ML8511A UV Sensor with Voltage Output FEDL8511A-02 Issue Date: October 6, 2015 GENERAL DESCRIPTION The ML8511A is a UV sensor, which is suitable for acquiring UV intensity indoors or outdoors. The ML8511A is equipped with an internal amplifier, which converts photo-current to voltage depending on the UV intensity. This unique feature offers an easy interface to external circuits such as ADC. In the power down mode, typical standby current is 0.1μA, thus enabling a longer battery life. FEATURES • Photodiode sensitive to UV-A and UV-B • Embedded operational amplifier • Analog voltage output • Low supply current (300μA typ.) and low standby current (0.1μA typ.) • Small and thin surface mount package (4.0mm x 3.7mm x 0.