CKSR15-NP Datasheet | LEM

Features - Closed loop (pensated) multi-range current transducer - Voltage output - Single supply - pact design for PCB mounting. Advantages - Very low temperature coefficient of offset - Very good du/dt immunity - Higher creepage distance/clearance - Reduced height - Reference pin with two modes: Ref IN and Ref OUT - Extended measuring range for unipolar measurement. Applications - AC variable speed and servo motor drives - Static converters for DC motor drives - Battery supplied applications - Uninterruptible Power Supplies (UPS) - Switched Mode Power Supplies (SMPS) - Power supplies for welding applications - Solar inverters. Standards - EN 50178: 1997 - IEC 60950-1: 2006 - IEC 61010-1: 2010 - IEC 61326-1: 2012 - UL 508: 2010. Application Domains - Industrial - Automotive (list of additional tests available at - LEM_Auto_Tech_Support@lem.). N° 97.E7.09.000.7, N° 97.E7.15.000.7, N° 97.E7.19.000.7, N° 97.E7.25.000.7 27December2022/Version 14 LEM reserves the right to carry out modifications on its transducers, in order to improve them. Page 1/21 LEM International SA Route du Nant-d’Avril, 152 1217 Meyrin .lem. Safety CKSR xx-NP ⚠ Caution If the device is used in a way that is not specified by the manufacturer, the protection provided by the device may be promised. Always inspect the electronics unit and connecting cable before using this product and do not use it if damaged. Mounting assembly shall guarantee the maximum primary conductor temperature, fulfill clearance and creepage distance, minimize electric and magnetic coupling, and unless otherwise specified can be mounted in any orientation. Caution, risk of electrical...