Datasheet4U Logo Datasheet4U.com

MCS3BT - 3-element colour sensor

Download the MCS3BT datasheet PDF. This datasheet also covers the MCS3AT variant, as both devices belong to the same 3-element colour sensor family and are provided as variant models within a single manufacturer datasheet.

Description

1 V1.6 APPROVED 2001/02/21 MAXIMUM RATINGS / CHARACTERISTICS (TA = 25°C; per single diode) Description Diameter of the light sensitivity area Light sensitivity area per element Photo sensitivity of colour ranges Symbol D A Smax λB λG λR VR IR C tr, tf NEP ϕ Top Tst fR = 100 Hz ∆λ(Filter) < 1%

Features

  • Dielectric filters guaranties the good optical properties of the colour sensors, such as:.
  • high transmission.
  • slight aging of the filter.
  • high temperature stability.
  • high signal frequency.
  • reduced cross talk.
  • small size (diameter of the optical sensitive surface ca. 2 mm).

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MCS3AT_Laser.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number MCS3BT
Manufacturer Laser
File Size 212.25 KB
Description 3-element colour sensor
Datasheet download datasheet MCS3BT Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MCS3122 Advanced KEELOQ Technology Encoder Microchip
MCS3142 Dual KEELOQ Technology Encoder Microchip
MCS38140PG05C GPS Digital Correlator Motorola
MCS-100-02 Wi-Fi Antenna Gemicom
MCS-51 (MCS-51/-96) Packaging Information Intel Corporation

Other Datasheets by Laser

Part Number Description
MCS3AO 3-element colour sensor
MCS3AT 3-element colour sensor

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com DATA-SHEET MCS3AT/BT 3-element colour sensor – TO5 FUNCTION The colour sensors are made of 3 Si-PIN photo diodes integrated on chip. They are carried out as segments of a ring with the diameter of 2,0 mm. The design as Si-PIN photo diodes allows signal frequencies up to MHz-range. In order to achieve a small cross talk between the photodiodes the individual sectors were separated from each other by additional structures. Each of these photodiodes is sensitised with dielectric spectral filter for its colour range, preferably for the primary colours red, green and blue.
Published: |