ispGDX160V-5B208 Datasheet | Lattice Semiconductor

ispGDX 160V/VA TM In-System Programmable 3.3V Generic Digital Crosspoint TM Features - IN-SYSTEM PROGRAMMABLE GENERIC DIGITAL CROSSPOINT FAMILY - Advanced Architecture Addresses Programmable PCB Interconnect, Bus Interface Integration and Jumper/Switch Replacement - “Any Input to Any Output” Routing - Fixed HIGH or LOW Output Option for Jumper/DIP Switch Emulation - Space-Saving PQFP and BGA Packaging - Dedicated IEEE 1149.1-pliant Boundary Scan Test - HIGH PERFORMANCE E2CMOS® TECHNOLOGY - 3.3V Core Power Supply - 3.5ns Input-to-Output/3.5ns Clock-to-Output Delay- - 250MHz Maximum Clock Frequency- - TTL/3.3V/2.5V patible Input Thresholds and Output Levels (Individually Programmable)- - Low-Power: 16.5mA Quiescent Icc- - 24mA IOL Drive with Programmable Slew Rate Control Option - PCI patible Drive Capability- - Schmitt Trigger Inputs for Noise Immunity - Electrically Erasable and Reprogrammable - Non-Volatile E2CMOS Technology - ispGDXV™ OFFERS THE FOLLOWING ADVANTAGES - 3.3V In-System Programmable Using Boundary Scan Test Access Port (TAP) - Change Interconnects in Seconds - FLEXIBLE ARCHITECTURE - binatorial/Latched/Registered Inputs or Outputs - Individual I/O Tri-state Control with Polarity Control - Dedicated Clock/Clock Enable Input Pins (four) or Programmable Clocks/Clock Enables from I/O Pins (40) - Single Level 4:1 Dynamic Path Selection (Tpd = 3.5ns)...