900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Lineage Power Corporation

AXA010A0X3Z Datasheet Preview

AXA010A0X3Z Datasheet

SIP Non-isolated Power Modules Programmable

No Preview Available !

Data Sheet
March 30, 2008
www.DataSheet4U.com
12V Austin LynxTM SIP Non-isolated Power Modules, Programmable:
10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Output Current
RoHS Compliant
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Delivers up to 10A output current
ƒ High efficiency – 93% at 3.3V full load (VIN = 12.0V)
ƒ Small size and low profile:
50.8 mm x 12.7 mm x 8.10 mm
(2.00 in x 0.5 in x 0.32 in)
ƒ Low output ripple and noise
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
ƒ High Reliability:
Calculated MTBF = 4.4 M hours at 25oC Full-load
ƒ Constant switching frequency (300 kHz)
ƒ Output voltage programmable from 0.75 Vdc to
5.5Vdc via external resistor
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Remote Sense
ƒ Over temperature protection
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSAC22.2 No. 60950-1-
03 Certified, and VDE0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
The 12V Austin LynxTM Programmable SIP power modules are non-isolated dc-dc converters that can deliver up to
10A of output current with full load efficiency of 93% at 3.3V output. These modules provide a precisely regulated
output voltage ranging from 0.75Vdc to 5.5Vdc, programmable via an external resistor over a wide range of input
voltage (VIN = 10 – 14Vdc). Their open-frame construction and small footprint enable designers to develop cost-
and space-efficient solutions. Standard features include remote On/Off, remote sense, output voltage adjustment,
overcurrent and overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
CSA is a registered trademark of Canadian Standards Association.
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-098 ver. 1.41
PDF name: austin lynx sip 12v x3.pdf




Lineage Power Corporation

AXA010A0X3Z Datasheet Preview

AXA010A0X3Z Datasheet

SIP Non-isolated Power Modules Programmable

No Preview Available !

Data Sheet
March 30, 2008
12V Austin LynxTM SIP Non-isolated Power Modules, Programmable:
10Vdc – 14Vdc input; 0.75Vdc to 5.5Vdc Output;10A Owwuwtp.DuattaCShuererte4Un.tcom
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Input Voltage
Continuous
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
Device
All
All
All
Symbol
VIN
TA
Tstg
Min
-0.3
-40
-55
Max Unit
15 Vdc
85 °C
125 °C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Operating Input Voltage
Maximum Input Current
(VIN= VIN, min to VIN, max, IO=IO, max VO,set = 3.3Vdc)
Input No Load Current
(VIN = 12.0Vdc, IO = 0, module enabled)
Input Stand-by Current
(VIN = 12.0Vdc, module disabled)
Inrush Transient
Device
All
All
Symbol
VIN
IIN,max
Min
10.0
VO,set = 0.75Vdc
VO,set = 5.0Vdc
All
IIN,No load
IIN,No load
IIN,stand-by
All I2t
Typ
12.0
40
100
2.0
Max
14.0
6.5
0.5
Unit
Vdc
Adc
mA
mA
mA
A2s
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1μH source impedance; VIN, min to
VIN, max, IO= IOmax ; See Test configuration section)
All
20 mAp-p
Input Ripple Rejection (120Hz)
All
30 dB
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to being
part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to
achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a 15A,
time-delay fuse (see Safety Considerations section). Based on the information provided in this data sheet on inrush
energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse
manufacturer’s data sheet for further information.
LINEAGE POWER
2


Part Number AXA010A0X3Z
Description SIP Non-isolated Power Modules Programmable
Maker Lineage Power Corporation
PDF Download

AXA010A0X3Z Datasheet PDF





Similar Datasheet

1 AXA010A0X3 SIP Non-isolated Power Modules Programmable
Lineage Power Corporation
2 AXA010A0X3Z SIP Non-isolated Power Modules Programmable
Lineage Power Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy