900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Lineage Power Corporation

AXA016A0X3 Datasheet Preview

AXA016A0X3 Datasheet

12V SIP Non-isolated Power Modules

No Preview Available !

Data Sheet
August 20, 2008
www.DataSheet4U.com
Austin SuperLynxTM 12V SIP Non-isolated Power Modules:
10Vdc – 14Vdc Input; 0.75Vdc to 5.5Vdc Output; 16A Output Current
RoHS Compliant
Features
ƒ Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
ƒ Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
ƒ Delivers up to 16A output current
ƒ High efficiency – 92% at 3.3V full load (VIN = 12.0V)
ƒ Small size and low profile:
50.8 mm x 12.7 mm x 8.10 mm
(2.00 in x 0.50 in x 0.32 in)
ƒ Low output ripple and noise
Applications
ƒ Distributed power architectures
ƒ Intermediate bus voltage applications
ƒ Telecommunications equipment
ƒ Servers and storage applications
ƒ Networking equipment
ƒ Enterprise Networks
ƒ Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
ƒ High Reliability:
Calculated MTBF = 4.4M hours at 25oC Full-load
ƒ Constant switching frequency (300 kHz)
ƒ Output voltage programmable from 0.75 Vdc to
5.5Vdc via external resistor
ƒ Line Regulation: 0.3% (typical)
ƒ Load Regulation: 0.4% (typical)
ƒ Temperature Regulation: 0.4 % (typical)
ƒ Remote On/Off
ƒ Remote Sense
ƒ Output overcurrent protection (non-latching)
ƒ Wide operating temperature range (-40°C to 85°C)
ƒ UL* 60950-1Recognized, CSAC22.2 No. 60950-1-
03 Certified, and VDE0805:2001-12 (EN60950-1)
Licensed
ƒ ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin SuperLynxTM 12V SIP power modules are non-isolated dc-dc converters that can deliver up to 16A of output
current with full load efficiency of 92% at 3.3V output. These modules provide a precisely regulated output voltage
ranging from 0.75Vdc to 5.5Vdc, programmable via an external resistor over a wide range of input voltage (VIN = 10
– 14Vdc). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient
solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overcurrent and
overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
CSA is a registered trademark of Canadian Standards Association.
VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-092 ver 1.62
PDF name: austin_superlynx_sip_12v_ds.pdf




Lineage Power Corporation

AXA016A0X3 Datasheet Preview

AXA016A0X3 Datasheet

12V SIP Non-isolated Power Modules

No Preview Available !

Data Sheet
August 20, 2008
Austin SuperLynxTM 12V SIP Non-isolated Power Modules:
10 – 14Vdc Input; 0.75Vdc to 5.5Vdc Output; 16A wowuwt.pDuattaSchuererte4Un.tcom
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are
absolute stress ratings only, functional operation of the device is not implied at these or any other conditions in
excess of those given in the operations sections of the data sheet. Exposure to absolute maximum ratings for
extended periods can adversely affect the device reliability.
Parameter
Input Voltage
Continuous
Operating Ambient Temperature
(see Thermal Considerations section)
Storage Temperature
Device
All
All
All
Symbol
VIN
TA
Tstg
Min
-0.3
-40
-55
Max Unit
15 Vdc
85 °C
125 °C
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions.
Parameter
Operating Input Voltage
Maximum Input Current
(VIN=10.0V to 14.0V, IO=IO, max )
Input No Load Current
Device
VO,set VIN – 0.5V
All
VO,set = 0.75 Vdc
(VIN = 12.0Vdc, Io = 0, module enabled)
VO,set = 5.0Vdc
Input Stand-by Current
(VIN = 12.0Vdc, module disabled)
Inrush Transient
All
All
Input Reflected Ripple Current, peak-to-peak
(5Hz to 20MHz, 1μH source impedance; VIN, min to
VIN, max, IO= IOmax ; See Test configuration section)
Input Ripple Rejection (120Hz)
All
All
Symbol
VIN
IIN,max
IIN,No load
IIN,No load
IIN,stand-by
I2t
Min
10.0
Typ
12.0
40
100
2
30
30
Max Unit
14.0 Vdc
9.5 Adc
mA
mA
mA
0.4 A2s
mAp-p
dB
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple standalone operation to being
part of a complex power architecture. To preserve maximum flexibility, internal fusing is not included, however, to
achieve maximum safety and system protection, always use an input line fuse. The safety agencies require a fast-
acting fuse with a maximum rating of 15 A (see Safety Considerations section). Based on the information provided in
this data sheet on inrush energy and maximum dc input current, the same type of fuse with a lower rating can be
used. Refer to the fuse manufacturer’s data sheet for further information.
LINEAGE POWER
2


Part Number AXA016A0X3
Description 12V SIP Non-isolated Power Modules
Maker Lineage Power Corporation
PDF Download

AXA016A0X3 Datasheet PDF





Similar Datasheet

1 AXA016A0X3 12V SIP Non-isolated Power Modules
Lineage Power Corporation
2 AXA016A0X3Z 12V SIP Non-isolated Power Modules
Lineage Power Corporation





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy