900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Linear Technology Electronic Components Datasheet

LTC3209EUF-2 Datasheet

600mA Main/Camera LED Controller

No Preview Available !

FEATURES
Multimode Charge Pump Provides Up to 94%
Efficiency (1x, 1.5x, 2x)
Up to 600mA Total Output Current
LTC3209-1: 8 Current Sources Available as
6 × 25mA MAIN, 1 × 400mA CAM and 1 × 15mA AUX
LTC3209-2: 8 Current Sources Available as
5 × 25mA MAIN, 2 × 200mA CAM and 1 × 15mA AUX
www.DLatEaDShOeent/4OUf.fcoamnd Brightness Level Programmable
Using 2-Wire I2CTM Interface
Automatic Charge Pump Mode Switching or Fixed
Mode for Power Supply Generation
Low Noise Constant Frequency Operation*
Internal Soft-Start Limits Inrush Current During
Start-up and Mode Switching
Short Circuit/Thermal/Open-Shorted LED Protection
256 Brightness States for MAIN Display
16 Brightness States for CAM Display
4 Brightness States for AUX Display
20-Lead (4mm × 4mm) QFN Package
U
APPLICATIO S
Video/Camera Phones with QVGA+ Displays
, LT, LTC and LTM are registered trademarks of Linear Technology Corporation.
All other trademarks are the property of their respective owners.
*Protected by U.S. Patents, including 6411531
LTC3209-1/LTC3209-2
600mA Main/Camera
LED Controller
DESCRIPTIO
The LTC®3209-1/LTC3209-2 are highly integrated
multidisplay LED controllers. These parts contain a high
efficiency, low noise charge pump to provide power to
MAIN, CAM and AUX LED displays. The LTC3209-1/
LTC3209-2 require only four small ceramic capacitors
and one current set resistor to form a complete LED power
supply and current controller.
The maximum display currents are set by a single external
resistor. Current for each LED is controlled by a precision
internal current source. Dimming and On/Off for all dis-
plays is achieved via the I2C serial interface. 256 states are
available for the MAIN display. Sixteen states are available
for the CAM display and four states are available for the
AUX display.
The charge pump optimizes efficiency based on the
voltage across the LED current sources. The part powers
up in 1x mode and will automatically switch to boost mode
whenever any enabled MAIN or CAM LED current source
begins to enter dropout. The first dropout switches the
part into 1.5x mode and a subsequent dropout switches
the part into 2x mode. The part resets to 1x mode
whenever a data bit is updated via the I2C port. The parts
are available in a 4mm × 4mm 20-lead QFN package.
TYPICAL APPLICATIO
LTC3209-1 6 MAIN/1 CAM Operation
LTC3209-2 5 MAIN/2 CAM Operation
2.2µF 2.2µF
2.2µF 2.2µF
VBAT
2.2µF
C1P C1M C2P C2M 2.2µF
VBAT1,2
CPO
I2C
LOW HI
LTC3209-1
SCL
SDA
CAMHL
RREF
6
MAIN1-6
CAM
AUX
GND
24.3k
MAIN
CAM
RED
3209 TA01
VBAT
2.2µF
C1P C1M C2P C2M 2.2µF
VBAT1,2
CPO
LTC3209-2
SCL
I2C
SDA
LOW HI
CAMHL
RREF
24.3k
5
MAIN1-5
2
CAM
AUX
GND
MAIN
CAM
RED
3209 TA02
320912fa
1


Linear Technology Electronic Components Datasheet

LTC3209EUF-2 Datasheet

600mA Main/Camera LED Controller

No Preview Available !

LTC3209-1/LTC3209-2
ABSOLUTE AXI U RATI GS
(Note 1)
VBAT, DVCC, CPO to GND ............................... –0.3 to 6V
SDA, SCL, CAMHL ..................... –0.3V to (DVCC + 0.3V)
ICPO (Note 4)....................................................... 700mA
IMAIN1-6 (Note 5) ................................................... 31mA
IAUX (Note 5) ......................................................... 30mA
ICAM1-2 (Note 5) .................................................. 250mA
ICAM (Note 5) ...................................................... 500mA
CPO, RREF Short-Circuit Duration ....................Indefinite
Operating Temperature Range (Note 2) .. –40°C to 85°C
Storage Temperature Range ................. –65°C to 125°C
UW U
PACKAGE/ORDER I FOR ATIO
www.DataSheet4U.com
TOP VIEW
TOP VIEW
20 19 18 17 16
CPO 1
15 SCL
MAIN1 2
14 SDA
MAIN2 3
21
13 CAMHL
MAIN3 4
12 CAM
MAIN4 5
11 DVCC
6 7 8 9 10
20 19 18 17 16
CPO 1
15 SCL
MAIN1 2
14 SDA
MAIN2 3
21
13 CAMHL
MAIN3 4
12 CAM2
MAIN4 5
11 CAM1
6 7 8 9 10
UF PACKAGE
20-LEAD (4mm × 4mm) PLASTIC QFN
TJMAX = 125°C, θJA = 40°C/W
EXPOSED PAD IS GND (PIN 21), MUST BE SOLDERED TO PCB
ORDER PART NUMBER
UF PART MARKING
LTC3209EUF-1
32091
Order Options Tape and Reel: Add #TR
Lead Free: Add #PBF Lead Free Tape and Reel: Add #TRPBF
Lead Free Part Marking: http://www.linear.com/leadfree/
Consult LTC Marketing for parts specified with wider operating temperature ranges.
UF PACKAGE
20-LEAD (4mm ´ 4mm) PLASTIC QFN
TJMAX = 125°C, θJA = 40°C/W
EXPOSED PAD IS GND (PIN 21), MUST BE SOLDERED TO PCB
ORDER PART NUMBER
UF PART MARKING
LTC3209EUF-2
32092
ELECTRICAL CHARACTERISTICS The denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at TA = 25°C. VBAT1,2 = 3.6V, DVCC = 3V, RREF = 24.3k, C1 = C2 = C3 = C4 = 2.2µF,
unless otherwise noted.
PARAMETER
CONDITIONS
MIN TYP MAX UNITS
VBAT Operating Voltage
IVBAT Operating Current
VBAT UVLO Threshold
DVCC Operating Voltage
DVCC Operating Current
DVCC UVLO Threshold
VBAT Shutdown Current
ICPO = 0, 1x Mode, LED Disabled
ICPO = 0, 1.5x Mode
ICPO = 0, 2x Mode
DVCC = 1.8V, Serial Port Idle
DVCC = 3V
2.9
4.5
V
0.4
mA
2.7
mA
4.5
mA
1.5
V
1.5
4.5
V
1
µA
1
V
3
7
µA
320912fa
2


Part Number LTC3209EUF-2
Description 600mA Main/Camera LED Controller
Maker Linear
PDF Download

LTC3209EUF-2 Datasheet PDF






Similar Datasheet

1 LTC3209EUF-1 600mA Main/Camera LED Controller
Linear
2 LTC3209EUF-2 600mA Main/Camera LED Controller
Linear





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy