900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Linear Technology Electronic Components Datasheet

LTC4121EUD Datasheet

40V 400mA Synchronous Step-Down Battery Charger

No Preview Available !

LTC4121/LTC4121-4.2
40V 400mA Synchronous
Step-Down Battery Charger
FEATURES
nn Wide Input Voltage Range: 4.4V to 40V
nn Temperature Compensated Input Voltage
Regulation for Maximum Power Point Tracking
(MPPT)
nn Adjustable Float Voltage 3.5V to 18V (LTC4121)
nn Fixed 4.2V Float Voltage Option (LTC4121-4.2)
nn High Efficiency: Up to 95%
nn 50mA to 400mA Programmable Charge Current
nn ±1% Feedback Voltage Accuracy
nn Programmable 5% Accurate Charge Current
nn Thermally Enhanced, Low Profile (0.75mm)
16-Lead (3mm × 3mm) QFN Package
APPLICATIONS
nn Handheld Instruments
nn Solar Powered Devices
nn Industrial/Military Sensors and Devices
L, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks
of Linear Technology Corporation. All other trademarks are the property of their respective
owners.
DESCRIPTION
The LTC®4121 is a 400mA constant-current/constant-
voltage (CC/CV) synchronous step-down battery charger.
In addition to CC/CV operation, the LTC4121 regulates its
input voltage to a programmable percentage of the input
open-circuit voltage. This technique maintains maximum
power transfer with high impedance input sources such
as solar panels.
An external resistor programs the charge current up to
400mA. The LTC4121-4.2 is suitable for charging Li-Ion/
Polymer batteries, while the programmable float voltage
of the LTC4121 is suitable for several battery chemistries.
The LTC4121 and LTC4121-4.2 include an accurate RUN
pin threshold, low voltage battery preconditioning and bad
battery fault detection, timer termination, auto-recharge,
and NTC temperature qualified charging. The FAULT pin
provides an indication of bad battery or temperature faults.
Once charging is terminated, the LTC4121 signals end-of-
charge via the CHRG pin, and enters a low current SLEEP
mode. An auto-restart feature starts a new charging cycle
if the battery voltage drops by 2.2%.
TYPICAL APPLICATION
High Efficiency, Wide Input Voltage Range Charging with LTC4121
10µF 10k
+–
VIN
VBAT + 200mV
TO 40V
IN
INTVCC
RUN
BOOST
MPPT
LTC4121 SW
CHGSNS
BAT
PROG
FB
RPROG
FREQ GND FBG
2.2µF
22nF
SLF6025T-470MR48
1.96M
22µF
787k +
Li-Ion
4121 TA01a
LTC4121 Efficiency vs VIN at VFLOAT = 8.4V
97
200mA, RPROG = 6.04k
400mA, RPROG = 3.01k
95
93
91
89
VBAT = 8.3V
87
5 10 15 20 25 30 35 40
VIN (V)
4121 TA01b
For more information www.linear.com/LTC4121
4121fc
1


Linear Technology Electronic Components Datasheet

LTC4121EUD Datasheet

40V 400mA Synchronous Step-Down Battery Charger

No Preview Available !

LTC4121/LTC4121-4.2
ABSOLUTE MAXIMUM RATINGS
(Note 1)
IN, RUN, CHRG, FAULT, MPPT.................... –0.3V to 43V
BOOST.................................... VSW – 0.3V to (VSW + 6V)
SW (DC)......................................... –0.3V to (VIN + 0.3V)
SW (Pulsed <100ns)....................... –1.5V to (VIN + 1.5V)
CHGSNS, BAT, FB/BATSNS, FBG................. –0.3V to 18V
FREQ, NTC, PROG, INTVCC........................... –0.3V to 6V
ICHGSNS, IBAT...................................................... ±600mA
ICHRG, IFAULT, .........................................................±5mA
IFB, IFBG (LTC4121)..................................................±5mA
IBATSNS (LTC4121-4.2)............................................±5mA
IINTVCC................................................................... –5mA
Operating Junction Temperature Range
(Note 2)................................................... –40°C to 125°C
Storage Temperature Range..................... –65°C to 150°
PIN CONFIGURATION
LTC4121
TOP VIEW
16 15 14 13
INTVCC 1
12 NTC
BOOST 2
11 FBG
GND
IN 3
10 FB
SW 4
9 BAT
5678
LTC4121-4.2
TOP VIEW
16 15 14 13
INTVCC 1
12 NTC
BOOST 2
11 NC
GND
IN 3
10 BATSNS
SW 4
9 BAT
5678
UD PACKAGE
16-LEAD (3mm × 3mm) PLASTIC QFN
TJMAX = 125°C, θJA = 54°C/W
EXPOSED PAD (PIN 17) IS GND, MUST BE SOLDERED TO PCB TO OBTAIN θJA
UD PACKAGE
16-LEAD (3mm × 3mm) PLASTIC QFN
TJMAX = 125°C, θJA = 54°C/W
EXPOSED PAD (PIN 17) IS GND, MUST BE SOLDERED TO PCB TO OBTAIN θJA
ORDER INFORMATION
(http://www.linear.com/product/LTC4121#orderinfo)
LTC4121 Options
PART NUMBER
LTC4121
LTC4121-4.2
FLOAT VOLTAGE
Programmable
4.2V Fixed
LEAD FREE FINISH
TAPE AND REEL
PART MARKING
PACKAGE DESCRIPTION
TEMPERATURE RANGE
LTC4121EUD#PBF
LTC4121EUD#TRPBF LGHC
16-Lead (3mm × 3mm) Plastic QFN
–40°C to 125°C
LTC4121IUD#PBF
LTC4121IUD#TRPBF
LGHC
16-Lead (3mm × 3mm) Plastic QFN
–40°C to 125°C
LTC4121EUD-4.2#PBF LTC4121EUD-4.2#TRPBF LGMV
16-Lead (3mm × 3mm) Plastic QFN
–40°C to 125°C
LTC4121IUD-4.2#PBF
LTC4121IUD-4.2#TRPBF LGMV
16-Lead (3mm × 3mm) Plastic QFN
–40°C to 125°C
Consult LTC Marketing for parts specified with wider operating temperature ranges.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/. Some packages are available in 500 unit reels through
designated sales channels with #TRMPBF suffix.
4121fc
2
For more information www.linear.com/LTC4121


Part Number LTC4121EUD
Description 40V 400mA Synchronous Step-Down Battery Charger
Maker Linear
PDF Download

LTC4121EUD Datasheet PDF






Similar Datasheet

1 LTC4121EUD 40V 400mA Synchronous Step-Down Battery Charger
Linear





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy