LTC5800-IPA
LTC5800-IPA is SmartMesh IP AP Mote manufactured by Linear Technology.
FEATURES n plete Radio Transceiver, Embedded Processor, and Networking Software for Forming a Self-Healing Mesh Network n Smart Mesh® Networks Incorporate: n Time Synchronized Network-Wide Scheduling n Per-Transmission Frequency Hopping n Redundant Spatially Diverse Topologies n Network-Wide Reliability and Power Optimization n NIST Certified Security n Smart Mesh Networks Deliver: n >99.999% Network Reliability Achieved in the Most Challenging RF Environments n Sub 50µA Routing Nodes n pliant to 6Lo WPAN Internet Protocol (IP) and IEEE 802.15.4e Standards
LTC5800-IPA FEATURES n Provides Network Access Point Radio Functions for Smart Mesh VManager n Supports Networks of Thousands of Nodes, in bination with VManager Network Management Software n Enables Redundant Network Ingress/Egress with Automatic Failover n PCB Module Versions Available (LTP®5901/2-IPA) with RF Modular Certifications n 72-Lead 10mm × 10mm QFN Package
DESCRIPTION
Smart Mesh IP™ wireless sensor networks are self managing, low power internet protocol (IP) networks built from wireless nodes called motes. The LTC®5800-IPA is the IP Access Point Mote™ (AP Mote™) in the Eterna®- family of IEEE 802.15.4e system-on-chip (So C) solutions, featuring a highly integrated, low power radio design by Dust Networks® as well as an ARM Cortex-M3 32-bit microprocessor running Dust’s embedded Smart Mesh IP networking software. Smart Mesh IP software provided with the LTC5800-IPA is a fully tested and validated binary image.
Based on the IETF 6Lo WPAN and IEEE-802.15.4e standards the LTC5800-IPA So C, executing Smart Mesh IP Access Point Mote software, provides a data ingress/egress point via a two wire UART interface. In bination with the VManager™ software, the LTC5800-IPA enables very large scale networks with full redundancy and automatic failover, in addition to providing a means to scale network throughput. With Dust’s time-synchronized Smart Mesh IP networks, all motes in the network may route, source or terminate data,...