Datasheet4U Logo Datasheet4U.com

LM385-2.5 - Micropower Voltage Reference

General Description

Micropower Shunt Voltage Reference COMMENTS 0.05% Initial Accuracy, 10ppm/°C Maximum Tempco Output Voltage: 1.25V, 2.5V, 4.096V and 5V 8 Linear Technology Corporation 1630 McCarthy Blvd., Milpitas, CA 95035-7417 (408) 432-1900 q FAX: (408) 434-0507 q www.linear.com 185fc LT/CP 0801 1.5K REV C

Key Features

  • s 20µA to 20mA Operating Range s Guaranteed 1% Initial Voltage Tolerance s Guaranteed 1Ω Dynamic Impedance s Very Low Power Consumption U.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM385-2.5 Micropower Voltage Reference Diode National Semiconductor
LM385-2.5 Micropower Voltage Reference Texas Instruments
LM385-2.5-N Micropower Voltage Reference Diode Texas Instruments
LM385-2.5V BANDGAP VOLTAGE REFERENCES TelCom Semiconductor Inc
LM385-1.2 Micropower Voltage Reference Diode National Semiconductor

Other Datasheets by Linear Technology (now Analog Devices)

Part Number Description
LM301 Operational Amplifiers
LM301A Operational Amplifiers
LM307 Operational Amplifiers
LM308 Operational Amplifiers
LM308A Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
U U FEATURES s 20µA to 20mA Operating Range s Guaranteed 1% Initial Voltage Tolerance s Guaranteed 1Ω Dynamic Impedance s Very Low Power Consumption U APPLICATIO S s Portable Meter References s Portable Test Instruments s Battery-Operated Systems s Panel Meters s Current Loop Instrumentation LM185-2.5/ LM285-2.5/LM385-2.5 Micropower Voltage Reference DESCRIPTIO The LM185-2.5 is a two-terminal band gap reference diode that has been designed for applications which require precision performance with micropower operation. The device provides guaranteed operation specifications at currents as low as 20µA. The nominal voltage is 2.5V with both 1% and 2% tolerances available.