LT1269 Datasheet | Linear Technology

LT1271/LT1269 4A High Efficiency Switching Regulators Features s s s s s s s s s DESCRIPTIO Wide Input Voltage Range 3.5V to 30V Low Quiescent Current: 7m A Internal 4A Switch Very Few External Parts Required Self Protected Against Overloads Shutdown Mode Draws Only 100µA Supply Current Flyback Regulated Mode Has Fully Floating Outputs es in Standard 5-Pin Package Can Be Externally Synchronized (See LT1072 Data Sheet) APPLICATI s s s s s Boost Converter High Efficiency Buck Converter PC Power Supply with Multiple Outputs Battery Up-Converter Negative-to-Positive Converter The LT®1271 and LT1269 are monolithic high power switching regulators. Identical to the popular LT1070, except for switching frequency (LT1271 = 60k Hz, LT1269 = 100k Hz) and slightly lower switch current, they can be operated in all standard switching configurations including buck, boost, flyback and inverting. A high current, high efficiency switch is included on the die along with all oscillator, control and protection circuitry. Integration of all functions allows the LT1271/LT1269 to be built in a standard TO-220 power package. This makes them extremely easy to use and provides “bust proof” operation similar to that obtained with 3-pin linear regulators. The LT1271/LT1269 operate with supply voltages from 3.5V to 30V, and draw only 7m A quiescent current. By utilizing current mode switching techniques, they provides excellent AC and DC load and line regulation. A patented adaptive antisat switch drive allows very wide ranging load currents with no loss in efficiency. An externally activated shutdown mode reduces total supply current to 100µA typical for standby operation. , LTC and LT are registered trademarks of Linear Technology Corporation. Burst Mode is a trademark of Linear Technology Corporation. USER NOTE: This data sheet is only intended to provide specifications, graphs, and a general functional description of the LT1271/LT1269. Application circuits are included to show the...