Datasheet4U Logo Datasheet4U.com

LT1780 - Low Power 5V RS232 Dual Driver/Receiver with 15kV ESD Protection

Download the LT1780 datasheet PDF. This datasheet also covers the LT1 variant, as both devices belong to the same low power 5v rs232 dual driver/receiver with 15kv esd protection family and are provided as variant models within a single manufacturer datasheet.

Features

  • s s s s s s s s s s s s s 10mA Max Supply Current ESD Protection to IEC 1000-4-2 Level 4 ±15kV Air Gap, ±8kV Contact Uses Small Capacitors: 0.1µF 120kBaud Operation for RL = 3k, CL = 2500pF 250kBaud Operation for RL = 3k, CL = 1000pF Outputs Withstand ± 30V Without Damage CMOS Comparable Low Power: 40mW Operates from a Single 5V Supply Rugged Bipolar Design Outputs Assume a High Impedance State When Off or Powered Down Meets All RS232 Specifications Available With or Without Shutdown Absolute.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LT1-780.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LT1701-7 500 Watt AC-DC Converters Power-One
LT1702-7 500 Watt AC-DC Converters Power-One
LT170E2-131 LCD Module Samsung
LT170E4-L01 LCD Module Samsung
LT1720 Single Supply 3V/5V Comparators Linear

Other Datasheets by Linear Technology (Analog Devices)

Part Number Description
LT1781 Low Power 5V RS232 Dual Driver/Receiver with 15kV ESD Protection
LT1782 Micropower/ Over-The-Top SOT-23/ Rail-to-Rail Input and Output Op Amp
LT1783 1.25MHz/ Over-The-Top Micropower/ Rail-to-Rail Input and Output Op Amp in SOT-23
LT1784 Over-The-Top Low Power / Rail-to-Rail Input and Output Op Amp in SOT-23
LT1785 60V Fault Protected RS485/RS422 Transceivers

Full PDF Text Transcription

Click to expand full text
LT1780/LT1781 Low Power 5V RS232 Dual Driver/Receiver with ±15kV ESD Protection DESCRIPTIO The LT®1780/LT1781 are dual RS232 driver/receiver pairs with integral charge pump to generate RS232 voltage levels from a single 5V supply. Using only 0.1µF external capacitors, these circuits consume only 40mW of power, and can operate to 120kbaud even while driving heavy capacitive loads. New ESD structures on the chip allow the LT1780/LT1781 to survive ±15kV air gap and ±8kV contact ESD tests per IEC 1000-4-2, eliminating the need for costly TransZorbs® on the RS232 line pins. The LT1780/ LT1781 are fully compliant with EIA RS232 standards. Driver outputs are protected from overload, and can be shorted to ground or up to ± 30V without damage.
Published: |