LT3501 - Monolithic Dual Tracking 3A Step-Down Switching Regulator

Linear Technology (Analog Devices)

General Description

The LT®3501 is a dual current mode PWM step-down DC/DC converter with two internal 3.5A switches.

Independent input voltage, feedback, soft-start and power good pins for each channel simplify complex power supply tracking/sequencing requirements.

Key Features

LT3501 Monolithic Dual Tracking 3A Step-Down Switching Regulator.

📥 Download Datasheet

LT3501 monolithic dual tracking 3a step-down switching regulator by Linear Technology (Analog Devices) - Datasheet Preview

Datasheet Details

Part number	LT3501
Manufacturer	Linear Technology (Analog Devices)
File Size	476.34 KB
Description	Monolithic Dual Tracking 3A Step-Down Switching Regulator
Datasheet	LT3501 Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
LT3504	Quad 40V/1A Step-Down Switching Regulator	Linear
LT3507A	Triple Monolithic Step-Down Regulator	Linear
LT3508	Dual Monolithic 1.4A Step-Down Switching Regulator	Analog Devices
LT35	projector	NEC
LT3514	Triple Step-Down Switching Regulator	Linear

Other Datasheets by Linear Technology (Analog Devices)

Part Number	Description
LT3500	Monolithic 2A Step-Down Regulator Plus Linear Regulator/Controller
LT3502	1.1MHz/2.2MHz 500mA Step-Down Regulators
LT3502A	1.1MHz/2.2MHz 500mA Step-Down Regulators
LT3503	2.2MHz Step-Down Switching Regulator
LT3505	Step-Down Switching Regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

www.DataSheet4U.com FEATURES ■ ■ ■ ■ LT3501 Monolithic Dual Tracking 3A Step-Down Switching Regulator DESCRIPTION The LT®3501 is a dual current mode PWM step-down DC/DC converter with two internal 3.5A switches. Independent input voltage, feedback, soft-start and power good pins for each channel simplify complex power supply tracking/sequencing requirements. Both converters are synchronized to either a common external clock input or a resistor programmable ﬁxed 250kHz to 1.5MHz internal oscillator. At all frequencies, a 180° phase relationship between channels is maintained, reducing voltage ripple and component size. Programmable frequency allows for optimization between efﬁciency and external component size.