900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Linear Technology Electronic Components Datasheet

LTC3616 Datasheet

6A 4MHz Monolithic Synchronous Step-Down DC/DC Converter

No Preview Available !

FEATURES
n 6A Output Current
n 2.25V to 5.5V Input Voltage Range
n Low Output Ripple Burst Mode® Operation: IQ = 75μA
n ±1% Output Voltage Accuracy
n Output Voltage Down to 0.6V
n High Efficiency: Up to 95%
n Low Dropout Operation: 100% Duty Cycle
n Programmable Slew Rate on SW Node Reduces
Noise and EMI
n Adjustable Switching Frequency: Up to 4MHz
n Optional Active Voltage Positioning (AVP) with
Internal Compensation
n Selectable Pulse-Skipping/Forced Continuous/Burst
Mode Operation with Adjustable Burst Clamp
n Programmable Soft-Start
n Inputs for Start-Up Tracking or External Reference
n DDR Memory Mode, IOUT = ±3A
n Available in a 24-Pin 3mm × 5mm QFN
Thermally Enhanced Package
APPLICATIONS
n Point-of-Load Supplies
n Distributed Power Supplies
n Portable Computer Systems
n DDR Memory Termination
n Handheld Devices
LTC3616www.DataSheet4U.com
6A, 4MHz Monolithic
Synchronous Step-Down
DC/DC Converter
DESCRIPTION
The LTC®3616 is a low quiescent current monolithic syn-
chronous buck regulator using a current mode, constant
frequency architecture. The no-load DC supply current
in sleep mode is only 70μA while maintaining the output
voltage (Burst Mode operation) at no load, dropping to zero
current in shutdown. The 2.25V to 5.5V input supply voltage
range makes the LTC3616 ideally suited for single Li-Ion
as well as fixed low voltage input applications. 100% duty
cycle capability provides low dropout operation, extending
the operating time in battery-powered systems.
The operating frequency is externally programmable up to
4MHz, allowing the use of small surface mount inductors.
For switching noise-sensitive applications, the LTC3616
can be synchronized to an external clock at up to 4MHz.
Forced continuous mode operation in the LTC3616 reduces
noise and RF interference. Adjustable compensation allows
the transient response to be optimized over a wide range
of loads and output capacitors.
The internal synchronous switch increases efficiency and
eliminates the need for an external catch diode, saving
external components and board space. The LTC3616 is
offered in a leadless 24-pin 3mm × 5mm thermally en-
hanced QFN package.
L, LT, LTC, LTM, Linear Technology, the Linear logo and Burst Mode are registered trademarks of
Linear Technology Corporation. All other trademarks are the property of their respective owners.
Protected by U.S. Patents, including 6580258, 5481178, 5994885, 6304066, 6498466, 6611131.
TYPICAL APPLICATION
VIN
2.7V TO 5.5V
SVIN
PVIN
RUN SRLIM/DDR
TRACK/SS
RT/SYNC
LTC3616 SW
PGOOD
SGND
ITH PGND
MODE
VFB
210k
22μF
s4
220nH
665k
VOUT
2.5V
47μF 6A
s2
3616 TA01a
Efficiency and Power Loss
vs Load Current
100
90
80 1
70
60 0.1
50
40 0.01
30
20
10
0 VOUT = 2.5V
1 10
VIN = 2.8V
VIN = 3.3V
VIN = 5V
0
100 1000 10000
OUTPUT CURRENT (mA)
3616 TA01b
3616f
1


Linear Technology Electronic Components Datasheet

LTC3616 Datasheet

6A 4MHz Monolithic Synchronous Step-Down DC/DC Converter

No Preview Available !

LTC3616
www.DataSheet4U.com
ABSOLUTE MAXIMUM RATINGS
(Note 1)
PVIN, SVIN Voltages ..................................... –0.3V to 6V
SW Voltage ................................. –0.3V to (PVIN + 0.3V)
ITH, RT/SYNC Voltages............... –0.3V to (SVIN + 0.3V)
SRLIM, TRACK/SS Voltages ....... –0.3V to (SVIN + 0.3V)
MODE, RUN, VFB Voltages .......... –0.3V to (SVIN + 0.3V)
PGOOD Voltage............................................ –0.3V to 6V
Operating Junction Temperature Range
(Notes 2, 11) .......................................... –40°C to 125°C
Storage Temperature ............................. –65°C to 150°C
Reflow Peak Body Temperature (QFN) .................. 260°C
PIN CONFIGURATION
TOP VIEW
24 23 22 21
SRLIM/DDR 1
RT/SYNC 2
SGND 3
PVIN 4
SW 5
SW 6
SW 7
SW 8
20 PGOOD
19 RUN
18 SVIN
25 17 PVIN
16 SW
15 SW
14 SW
13 SW
9 10 11 12
UDD PACKAGE
24-LEAD (3mm s 5mm) PLASTIC QFN
TJMAX = 125°C, θJA = 38°C/W
EXPOSED PAD (PIN 25) IS PGND, MUST BE SOLDERED TO PCB
ORDER INFORMATION
LEAD FREE FINISH
TAPE AND REEL
PART MARKING*
PACKAGE DESCRIPTION
TEMPERATURE RANGE
LTC3616EUDD#PBF
LTC3616EUDD#TRPBF LDYG
24-Lead (3mm × 5mm) Plastic QFN –40°C to 125°C
LTC3616IUDD#PBF
LTC3616IUDD#TRPBF LDYG
24-Lead (3mm × 5mm) Plastic QFN –40°C to 125°C
Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
Consult LTC Marketing for information on non-standard lead based finish parts.
For more information on lead free part marking, go to: http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to: http://www.linear.com/tapeandreel/
3616f
2


Part Number LTC3616
Description 6A 4MHz Monolithic Synchronous Step-Down DC/DC Converter
Maker Linear Technology
PDF Download

LTC3616 Datasheet PDF






Similar Datasheet

1 LTC3610 12A Monolithic Synchronous Step-Down DC/DC Converter
Linear Technology
2 LTC3611 32V Monolithic Synchronous Step-Down DC/DC Converter
Linear Technology
3 LTC3612 4MHz Monolithic Synchronous Step-Down DC/DC Converter
Linear
4 LTC3613 15A Monolithic Step Down Regulator
Linear Technology
5 LTC3614 (LTC3000 Series) SEVEN-SEGMENT NUMERIC LED DISPLAY
LITE-ON Electronics
6 LTC3614 4MHz Monolithic Synchronous Step-Down DC/DC Converter
Linear
7 LTC3615 3A Synchronous Step-Down DC/DC Converter
Linear Technology
8 LTC3615-1 3A Synchronous Step-Down DC/DC Converter
Linear
9 LTC3616 6A 4MHz Monolithic Synchronous Step-Down DC/DC Converter
Linear Technology





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy