1.5SMB33A Datasheet | Littelfuse

Description The 1.5SMB Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features & Benefits - For surface mounted applications to optimize board space - Low profile package - Typical failure mode is short from over-specified voltage or current - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25))(αT:Temperature Coefficient, typical value is 0.1%) - Excellent clamping capability - Low incremental surge resistance - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - ESD protection of data lines in accordance with IEC 61000-42, 30k V(Air), 30k V (Contact) - EFT protection of data lines in accordance with IEC 610004-4 - Built-in strain relief - Glass passivated chip junction - 1500W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - Meet MSL level 1 per J-STD-020, and high temperature soldering guaranteed: 260C/10sec - Matte tin lead- free Plated - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) Applications TVS ponents are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Tele, puter, Industrial and Consumer electronic applications. Functional Diagram Cathode Bi-directional Uni-directional Anode © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 12/05/22 1.5SMB Series Surface Mount - 1000W TVS Diodes Datasheet Part Number (Uni) Part Number (Bi) Electrical Characteristics (TA=25°C unless otherwise...