1KSMB11A Datasheet | Littelfuse

Description The 1KSMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - 1000W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - For surface mounted applications to optimize board space - Low profile package - Typical failure mode is short from over-specified voltage or current - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - IEC-61000-4-2 ESD 30k V(Air), 30k V (Contact) - ESD protection of data lines in accordance with IEC 61000-4-2 - EFT protection of data lines in accordance with IEC 61000-4-4 - Built-in strain relief - x V(αB(R1T:+@Tαe Tm TJ=pxe V(r BTa RJt@u-2r2e55°)C) Coefficient, typical value is 0.1%) - Glass passivated chip junction - Fast response time: typically less than 1.0ps from 0V to BV min - Excellent clamping capability - Low incremental surge resistance - w Tyhpeicna Vl IBRR less than 1μA max>12V - High temperature to reflow soldering guaranteed: 260°C/40sec - Plastic package is flammability rated V-0 per Underwriters Laboratories - Meet MSL level1, per J-STD-020, LF maximun peak of 260°C - Matte tin lead- free Plated - Available in breakdown Voltage from 6.8V to 180V specially designed for automotive applications - Offers high-surge rating in pact package: bridges the gap between 600W and 1.5KW - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD609A.01) Applications TVS devices are ideal for the protection of I/O Interfaces, CVCo Cmbpuustaenr,d Inodtuhsetrrivaul lannedra Cbolencsiurcmueitrseulescetdroinni Tcele, applications. Additional...