30KPA180CA Datasheet | Littelfuse

- 30k W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - Glass passivated chip junction in P600 package - Fast response time: typically less than 1.0ps from 0 Volts to BV min - Excellent clamping capability - Typical failure mode is short from over-specified voltage or current - Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c - IEC-61000-4-2 ESD 30k V(Air), 30k V (Contact) - ESD protection of data lines in accordance with IEC 61000-4-2 - EFT protection of data lines in accordance with IEC 61000-4-4 - Low incremental surge resistance - Typical IR less than 2μA when VBR min>73V - High temperature to reflow soldering guaranteed: 260°C/40sec / 0.375”, (9.5mm) lead length, 5 lbs., (2.3kg) tension - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) - UL Recognized epoxy meeting flammability rating V-0 - Matte tin lead- free plated - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS ponents are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in tele, puter, industrial and consumer electronic applications. Additional Infomarion Cathode Bi-directional Uni-directional Anode Resources Samples © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: BA.08/27/20 TVS...