3KP200CA Overview
Description
The 3KP Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Bi-directional Agency Approvals AGENCY AGENCY FILE NUMBER E230531 Parameter Symbol Value Unit Peak Pulse Power Dissipation by 10/1000μs Test Waveform (Fig.2) PPPM 3000 W (Note 1), (Note 4) Steady State Power Dissipation on Infinite Heat Sink at TL=75ºC PD Peak Forward Surge Current, 8.3ms Single Half Sine Wave Unidirectional IFSM Only (Note 2) Maximum Instantaneous Forward Voltage at 100A for Unidirectional VF Only (Note 3) 7.0 W 300 A 3.5/5.0 V Operating Junction and Storage Temperature Range TJ, TSTG -55 to 175 °C Typical RθJL 8.0 °C/W Typical RθJA 40 °C/W Notes: 1.
Key Features
- 3000W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%
- Glass passivated chip junction in P600 package
- Fast response time: typically less than 1.0ps from 0 Volts to BV min
- Excellent clamping capability
- Typical failure mode is short from over-specified voltage or current
- Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
- IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
- E SD protection of data lines in accordance wit
