LK006V5 Datasheet | Littelfuse

Description This 6 Amp bidirectional solid state switch series is designed for AC switching and phase control applications such as motor speed and temperature modulation controls, lighting controls, and static switching relays. Sensitive type ponents guarantee gate control in Quadrants I & IV as needed for digital control circuitry. Standard type ponents normally operate in Quadrants I & III triggered from AC line. Alternistor type ponents only operate in quadrants I, II, & III and are used in circuits requiring high dv/dt capability. Agency Approval Agency - - L Package Only Agency File Number E71639- Main Features Symbol IT(RMS) VDRM/ VRRM IGT (Q1) Value 6 400, 600, 800 or 1000 5 to 50 Unit A V m A Schematic Symbol MT2 MT1 Additional Information Features & Benefits - Ro HS-pliant - Glass - passivated junctions - Voltage capability up to 1000 V - Surge capability up to 85 A - The L-package has an isolation rating of 2500VRMS - Solid-state switching eliminates arcing or contact bounce that create voltage transients - No contacts to wear out from reaction of switching events - Restricted (or limited) RFI generation, depending on activation point of sine wave - Only requires a short gate activation pulse during each half-cycle - UL Recognized as an Electrically Isolated Semiconductor Device to UL 1557. Applications Excellent for AC switching and phase control applications such as heating, lighting, and motor speed controls. Typical applications are AC solid-state switches, light dimmers, power tools, home/brown goods and white goods appliances. Alternistor Triacs (no snubber required) are used in applications with extremely inductive loads requiring the highest mutation performance. Internally constructed isolated packages are offered for ease of heat sinking with highest isolation voltage. Resources Samples...