Datasheet4U Logo Datasheet4U.com

LS24062RQ23 - 28V 6A Bidirectional eFuse

Description

The LS24062RQ23 is an advanced 28V 6A rated bidirectional load switch which provides overload, short circuit, input voltage surge, excessive inrush current and over-temperature protections to power the system.

Features

  • Wide Supply Voltage Range from 3V to 24V.
  • 30V Tolerance on Port VBUS1 and VBUS2.
  • Integrate a 24mΩ Ultra Low On Protection Switch.
  • External Adjustable Soft-Start Time.
  • External Adjustable Input Over-voltage Threshold.
  • Short-circuit Protection.
  • Fault Indicator.
  • Thermal Shutdown Protection and Auto Recovery.
  • Each Port VBUS1/VBUS2 Independent Control.
  • External Adjustable Current Limit.
  • Enable Interface Pin.
  • Port Discharge Interface Pin.

📥 Download Datasheet

Datasheet preview – LS24062RQ23

Datasheet Details

Part number LS24062RQ23
Manufacturer Littelfuse
File Size 1.55 MB
Description 28V 6A Bidirectional eFuse
Datasheet download datasheet LS24062RQ23 Datasheet
Additional preview pages of the LS24062RQ23 datasheet.

📁 Similar Datasheet

  • LS24 - Surface Mount Schottky Rectifier (GOOD-ARK)
  • LS248 - BCD TO 7-SEGMENT DECODER (National Semiconductor)
  • LS24A - Surface Mount Schottky Rectifier (GOOD-ARK)
  • LS24D16C-HS1 - DC Controller (Teledyne)
  • LS24D27C - DC Controller (Teledyne)
  • LS20 - Surface Mountable Illuminated Switch (ETC)
  • LS20030 - GPS smart antenna module (LOCOSYS)
  • LS20031 - GPS smart antenna module (LOCOSYS)
  • LS20032 - GPS smart antenna module (LOCOSYS)
  • LS20033 - GPS smart antenna module (LOCOSYS)
Other Datasheets by Littelfuse

Full PDF Text Transcription

Click to expand full text
Protection IC Datasheet LS24062RQ23 28V 6A Bidirectional eFuse with Dual Port Independent Current Limit Setting RoHS Pb Description The LS24062RQ23 is an advanced 28V 6A rated bidirectional load switch which provides overload, short circuit, input voltage surge, excessive inrush current and over-temperature protections to power the system. The built-in 24mΩ ultra low RDS(ON) power switch helps reducing power loss during normal operation. The device features two input/output ports, VBUS1 and VBUS2, which are rated at 30V Absolute Maximum. Each port has independent enable, external current limit setting and discharge control pins. The integrated two N-channel power switch M1 and M2 in-series configuration blocks any leakage between VBUS1 and VBUS2 two ports when the device is disabled.
Published: |