900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Littelfuse

MAC15-10G Datasheet Preview

MAC15-10G Datasheet

TRIAC

No Preview Available !

MAC15 Series
TRIAC – 400V - 800V
Additional Information
Resources
Accessories
Functional Diagram
Samples
MT 2
MT 1
G
Thyristors Datasheet
RoHS Pb
Description
Designed primarily for full-wave ac control applications, such as
solid−state relays, motor controls, heating controls and power
supplies; or wherever full−wave silicon gate controlled solid−state
devices are needed. Triac type thyristors switch from a blocking to
a conducting state for either polarity of applied main terminal
voltage with positive or negative gate triggering.
Features
Blocking Voltage to 800 V
All Diffused and Glass
Passivated Junctions for
Greater Parameter Uniformity
and Stability
Small, Rugged, Thermowatt
Construction for Low Thermal
Resistance, High Heat
Dissipation and Durability
Gate Triggering Guaranteed in
Three Modes (MAC15 Series)
or Four Modes (MAC15A
Series)
These Devices are Pb−Free
and are RoHS Compliant
Pin Out
CASE 221A
STYLE 4
1
2
© 2021 Littelfuse, Inc.
1
Specifications are subject to change without notice.
Revised: GD. 03/08/21




Littelfuse

MAC15-10G Datasheet Preview

MAC15-10G Datasheet

TRIAC

No Preview Available !

MAC15 Series
TRIAC – 400V - 800V
Thyristors Datasheet
Maximum Ratings (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive Off-State Voltage (Note 1)
(Gate Open, Sine Wave 50 to 60 Hz, TJ = -40° to 125°C)
MAC15A6G
MAC15-8G, MAC15A8G
MAC15-10G, MAC15A10G
VDRM,
VRRM
400
600
800
V
On-State RMS Current (Full Cycle Sine Wave, 50 to 60 Hz, TC = 80°C)
Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TC = 80°C)
Preceded and Followed by Rated Current
Peak Gate Voltage
(Pulse Width ≤ 1.0 µsec; TC = 90°C)
Circuit Fusing Consideration (t = 8.3 ms)
IT (RMS)
ITSM
VGM
I2t
15
A
150
A
10
V
93
A²sec
Peak Gate Power
(TC = 80°C, Pulse Width = 1.0 µs)
PGM
20
W
Peak Gate Current
(Pulse Width ≤ 1.0 µsec; TC = 90°C)
IGM
2.0
A
Average Gate Power (t = 8.3 ms, TC = 80°C)
PG (AV)
0.5
W
Operating Junction Temperature Range
TJ
-40 to +125
°C
Storage Temperature Range
Tstg
-40 to +150
°C
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages
shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
Thermal Characteristics
Rating
Thermal Resistance,
Junction−to−Case (AC)
Junction−to−Ambient
Maximum Lead Temperature for Soldering Purposes, 1/8” from case for 10 seconds
Symbol
RƟJC
RƟJA
TL
Value
2.0
62.5
260
Unit
°C/W
°C
Electrical Characteristics - OFF (TJ = 25°C unless otherwise noted ; Electricals apply in both
directions)
Characteristic
Peak Repetitive Blocking Current
(VD = VDRM = VRRM; Gate Open)
Symbol
Min
Typ
Max
Unit
TJ = 25°C
TJ = 125°C
IDRM,
-
IRRM
-
-
0.01
mA
-
2.0
Electrical Characteristics - ON (TJ = 25°C unless otherwise noted; Electricals apply in both
directions)
Characteristic
Symbol
Min
Peak On−State Voltage (Note 2) (ITM = ±21 A Peak)
VTM
-
MT2(+), G(+)
-
Gate Trigger Current
(Continuous dc)
(VD = 12 V, RL = 100 Ω)
MT2(+), G(−)
-
MT2(−), G(−)
IGT
-
MT2(–), G(+)
-
Gate Trigger Voltage
(Continuous dc)
(VD = 12 V, RL = 100 Ω)
MT2(+), G(+)
-
MT2(+), G(−)
MT2(−), G(−)
VGT
-
-
MT2(–), G(+)
-
Gate Non−Trigger Voltage
(TJ = 110°C)
(VD = 12 V, RL = 100 Ω)
MT2(+), G(+)
0.2
MT2(+), G(−)
MT2(−), G(−)
VGD
0.2
0.2
MT2(–), G(+)
0.2
Holding Current (VD = 12 Vdc, Gate Open, Initiating Current = ±200 mA))
IH
-
Turn-On Time (VD = Rated VDRM, ITM = 17 A)
(IGT = 120 mA, Rise Time = 0.1 µs, Pulse Width = 2 µs)
tgt
-
2. Indicates Pulse Test: Pulse Width ≤ 2.0 ms, Duty Cycle ≤ 2%.
2
Typ
Max
Unit
1.3
1.6
V
-
50
-
50
-
50
mA
-
75
0.9
2
0.9
2
1.1
2
V
1.4
2.5
-
-
-
-
-
-
V
-
-
6.0
40
mA
1.5
-
µs
© 2021 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: GD. 03/08/21


Part Number MAC15-10G
Description TRIAC
Maker Littelfuse
PDF Download

MAC15-10G Datasheet PDF






Similar Datasheet

1 MAC15-10 Triac
Motorola
2 MAC15-10 Thyristor TRIAC 800V 150A 3-Pin(3+Tab) TO-220AB Bulk
New Jersey Semiconductor
3 MAC15-10FP Triac
Motorola
4 MAC15-10FP TRIAC SILICON BIDIRECTIONAL THYRISTORS
New Jersey Semiconductor
5 MAC15-10G TRIAC
Littelfuse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy