MAC15A8 Datasheet | Littelfuse

Description Designed primarily for full-wave ac control applications, such as solid- state relays, motor controls, heating controls and power supplies; or wherever full- wave silicon gate controlled solid- state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either polarity of applied main terminal voltage with positive or negative gate triggering. Features - Blocking Voltage to 800 V - All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity and Stability - Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability - Gate Triggering Guaranteed in Three Modes (MAC15 Series) or Four Modes (MAC15A Series) - These Devices are Pb- Free and are Ro HS pliant Pin Out CASE 221A STYLE 4 1 2 © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 03/08/21 MAC15 Series TRIAC - 400V - 800V Thyristors Datasheet Maximum Ratings (TJ = 25°C unless otherwise noted) Rating Symbol Value Unit Peak Repetitive Off-State Voltage (Note 1) (Gate Open, Sine Wave 50 to 60 Hz, TJ = -40° to 125°C) MAC15A6G MAC15-8G, MAC15A8G MAC15-10G, MAC15A10G VDRM, VRRM 400 600 800 On-State RMS Current (Full Cycle Sine Wave, 50 to 60 Hz, TC = 80°C) Peak Non-Repetitive Surge Current (One Full Cycle Sine Wave, 60 Hz, TC = 80°C) Preceded and Followed by Rated Current Peak Gate Voltage (Pulse Width ≤ 1.0 µsec; TC = 90°C) Circuit Fusing Consideration (t = 8.3 ms) IT (RMS) ITSM VGM I2t A²sec Peak Gate Power (TC = 80°C, Pulse Width = 1.0 µs) Peak Gate Current (Pulse Width ≤ 1.0 µsec; TC =...