900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Littelfuse

MCR218-6G Datasheet Preview

MCR218-6G Datasheet

Silicon Controlled Rectifiers

No Preview Available !

Thyristors
Surface Mount – 50V - 400V > MCR218-2G, MCR218-4G, MCR218-6G
MCR218-2G, MCR218-4G, MCR218-6G
Pb
Description
Designed primarily for half-wave ac control applications,
such as motor controls, heating controls and power
supplies; or wherever half-wave silicon gate-controlled,
solid-state devices are needed.
Features
• Glass-Passivated
Junctions
• Blocking Voltage to 400
Volts
• TO-220 Construction −
Low Thermal Resistance,
High Heat Dissipation and
Durability
Pin Out
Functional Diagram
CASE 221A
STYLE 4
1
2
Additional Information
Datasheet
Resources
Samples
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/15/19




Littelfuse

MCR218-6G Datasheet Preview

MCR218-6G Datasheet

Silicon Controlled Rectifiers

No Preview Available !

Thyristors
Surface Mount – 50V - 400V > MCR218-2G, MCR218-4G, MCR218-6G
Maximum Ratings (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Peak Repetitive Off−State Voltage (Note 1)
(− 40 to 125°C, Sine Wave, 50 to 60 Hz, Gate Open)
On-State RMS Current
(180º Conduction Angles; TC = 85ºC)
Peak Discharge Current (Note 2)
Average On-State Current
(180º Conduction Angles; TC = 85ºC)
Peak Non-Repetitive Surge Current
(1/2 Cycle, Sine Wave 60 Hz, TJ = 125°C)
Circuit Fusing Consideration (t = 8.3 ms)
Forward Peak Gate Current (Pulse Width ≤ 1.0 µsec, TC= 80°C)
Forward Peak Gate Current (Pulse Width ≤ 1.0 µsec, TC= 85°C)
Forward Average Gate Power (t = 8.3 ms, TC = 85ºC)
Operating Junction Temperature Range
Storage Temperature Range
Mounting Torque
MCR68-2
VDRM,
VRRM
ITM (RMS)
ITM
IT(AV)
ITSM
I2t
IGM
IGM
PG(AV)
TJ
Tstg
50
12
300
8.0
100
40
2.0
20
0.5
-40 to +125
-40 to +150
8.0
V
A
A
A
A
A²sec
A
W
W
°C
°C
in. lb.
Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal
operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability
may be affected.
1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be
applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of
the devices are exceeded.
2. Ratings apply for tw = 1 ms. See Figure 1 for ITM capability for various duration of an exponentially decaying current waveform, tw is defined as 5 time constants
of an exponentially decaying current pulse.
Thermal Characteristics
Rating
Thermal Resistance,
Junction−to−Case (AC)
Junction−to−Ambient
Maximum Lead Temperature for Soldering Purposes, 1/8” from case for
10 seconds
Symbol
RƟJC
RƟJA
TL
Value
2.0
60
260
Unit
°C/W
°C
Electrical Characteristics - OFF (TJ = 25°C unless otherwise noted)
Characteristic
Peak Repetitive Forward or Reverse Blocking Current
(VD = Rated VDRM and VRRM; Gate Open)
TJ = 25°C
TJ = 125°C
Symbol
Min
Typ
Max
Unit
IDRM,
-
IRRM
-
-
10
mA
-
2.0
Electrical Characteristics - ON (TJ = 25°C unless otherwise noted)
Characteristic
Symbol
Min
Peak Forward On−State Voltage (Note 2)
(ITM = 32 A)(ITM = 24 A) (Note 3)
(ITM = 300 A, tw = 1 ms) (Note 4)
VTM
_
_
Gate Trigger Current (Continuous dc) (VD = 12 V; RL = 100 Ω)
IGT
2.0
Gate Trigger Voltage (Continuous dc) (VD = 12 V; RL = 100 Ω)
VGT
_
Gate Trigger Non-Current (Continuous dc) (VD = 12 V; RL = 100 Ω)
VGD
0.2
Holding Current
(VD = 12 V, Initiating Current = 200 mA, Gate Open))
IH
3.0
Latch Current (VD = 12 V, IG = 30 mA)
IL
_
Gate Controlled Turn-On Time (Note 5)
(VD = Rated VDRM, IG = 150 mA) (ITM = 24 A Peak)
VGT
_
Typ
_
6.0
7.0
0.65
0.40
15
35
1.0
Max
2.2
_
30
1.5
_
50
80
_
Unit
V
mA
V
V
mA
mA
µs
© 2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 07/15/19


Part Number MCR218-6G
Description Silicon Controlled Rectifiers
Maker Littelfuse
PDF Download

MCR218-6G Datasheet PDF






Similar Datasheet

1 MCR218-6 (MCR218-x) Silicon Controlled Rectifiers Reverse Blocking Thyristors
ON Semiconductor
2 MCR218-6 Thyristor SCR 400V 100A 3-Pin(3+Tab) TO-220AB Bulk
New Jersey Semiconductor
3 MCR218-6 Thyristors
Motorola
4 MCR218-6 SILICON CONTROLLED RECTIFIERS
Digitron Semiconductors
5 MCR218-6FP Silicon Controlled Rectifier
ON Semiconductor
6 MCR218-6FP Silicon Controlled Rectifiers
Motorola
7 MCR218-6G Silicon Controlled Rectifiers
ON Semiconductor
8 MCR218-6G Silicon Controlled Rectifiers
Littelfuse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy