P4KE16CA Datasheet | Littelfuse

Description The P4KE Series is designed specifically to protect sensitive electronic equipment from EFTs, ESD, and induced lightning transients. Features - 400W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% - Glass passivated chip junction in DO-41 Package - Fast response time: typically less than 1.0ps from 0 Volts to VBR min - Excellent clamping capability - Typical failure mode is a short circuit - Whisker test is conducted per Table 4a/4c of JEDEC JESD201A - IEC 61000-4-2 ESD 30k V(Air), 30k V (Contact) - EFT protection of data lines in accordance with IEC 61000-4-4 - Low incremental surge resistance - Typical IR ≤ 1 µA for VBR min > 12.6 V - High temperature reflow soldering guaranteed: 260°C/30sec / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension - VBR @ TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient, typical value is 0.1%) - UL Recognized pound meeting flammability rating V-0 - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pbfree and the terminal finish material is tin(Sn) (IPC/ JEDEC J-STD-609A.01) Applications TVS ponents are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuits used in tele, puter, industrial ICT equipment and consumer electronic applications. Functional Diagram Additional Infomarion Cathode Bi-directional Uni-directional Anode Resources Samples © 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC.10/26/20 TVS Diode Axial Leaded - 400W > P4KE series Electrical Characteristics (TA=25°C unless otherwise noted) Part...