Datasheet4U Logo Datasheet4U.com

P6SMB350A Datasheet TVS Diodes

Manufacturer: Littelfuse

Download the P6SMB350A datasheet PDF. This datasheet also includes the P6SMB6.8A variant, as both parts are published together in a single manufacturer document.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (P6SMB6.8A-Littelfuse.pdf) that lists specifications for multiple related part numbers.

General Description

The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Overview

P6SMB Series TVS Diodes Surface Mount – 600W > P6SMB series RoHS Pb e3 Uni-directional Bi-directional Agency Approvals Agency Agency File Number E230531 Maximum Ratings and Thermal Characteristics (TA=25OC unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note 1),(Note 2) -Single Die Parts Peak Pulse Power Dissipation(Fig.2) by 10/1000us Test Waveform(Fig.4) (Note.1, Note.2)-Stacked Die Parts (Note.5) PPPM PPPM 600 W 800 W Power Dissipation on Infinite Heat Sink at TL=50OC PD Peak Forward Surge Current, 8.3ms Single Half Sine Wave (Note 3) IFSM Maximum Instantaneous Forward Voltage at 50A for Unidirectional Only (Note 4) VF 5.0 W 100 A 3.5/5.0 V Operating Temperature Range Storage Temperature Range Typical Thermal Resistance Junction to Lead Typical Thermal Resistance Junction to Ambient TJ -65 to 150 °C TSTG -65 to 175 °C RƟJL 20 °C/W RƟJA 100 °C/W Notes: 1.

Non-repetitive current pulse , per Fig.

4 and derated above TJ (initial) =25OC per Fig.

Key Features

  • 600W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycles):0.01%.
  • Excellent clamping capability.
  • Low incremental surge resistance.
  • Typical IR less than 1μA when VBR min>12V.
  • Optimized surface mount footprint for minimal PCB space impact.
  • Low profile package.
  • Typical failure mode due to exceeding maximum ratings is a short circuit condition.
  • Whisker test conducted based on Table 4a and 4c of JE.