900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






Littelfuse

SRV05-4HTG Datasheet Preview

SRV05-4HTG Datasheet

TVS Diode Arrays

No Preview Available !

TVS Diode Arrays (SPA® Diodes)
Low Capacitance ESD Protection - SRV05 Series
SRV05 Series 6V 10A Diode Array
Pinout
I/O 1
GND
I/O 2
I/O 4
VCC
I/O 3
Functional Block Diagram
65
4
1 23
Additional Information
Datasheet
Resources
Samples
Life Support Note:
Not Intended for Use in Life Support or Life Saving Applications
The products shown herein are not designed for use in life sustaining or life saving
applications unless otherwise expressly indicated.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17
RoHS Pb GREEN
Description
The SRV05 integrates low capacitance rail-to-rail diodes with
an additional zener diode to protect each I/O pin against
ESD and high surge events. This robust device can safely
absorb surge current per IEC61000-4-5 (tP=8/20µs) without
performance degradation and a minimum ±20kV ESD
per IEC61000-4-2. Their very low loading capacitance also
makes them ideal for protecting high speed signal pins.
Features
• ESD, IEC61000-4-2,
±20kV contact, ±30kV air
• EFT, IEC61000-4-4, 40A
(5/50ns)
• Lightning, IEC61000-4-5,
10A (8/20μs)
• L ow capacitance of 2pF
(TYP) per I/O
• Low leakage current of
0.5μA (MAX) at 5V
• S mall SOT23-6 (JEDEC
MO-178) packaging
Applications
• LCD/PDP TVs
• Monitors
• Notebooks
• 10/100/1000 Ethernet
• Firewire
• Set Top Boxes
• Flat Panel Displays
• Portable Medical
10/100 Ethernet Differential Protection RJ45
ApplicaTtXi+on Examples
10/100
Ethernet
PHY
TX -
USRXB+
Controller
USB Dual Port Protect1ion V6 BUS
RT 2 5
RT
CT CT
34
VSBRUVS05-4HTG
SRV05-4HTG
Unused
Unused
TX +
TX -
VBUS
D+
USB
D - RXP+ort
RX -
GND Unused
Unused
RX -
VCC
GND
CT
VCRC T
RT
CT
75 75 75 VBUS75
VBUS
D+
D-
GND
USB
Port
TX +
10/100/1000
Ethernet
PHY
TX -
RX +
RX -
VCC
GND
10/100/1000 Ethernet Protection
16
25
34
SRV05-4HTG
VCC
75 75 75 75
RJ45
Unused
Unused
TX +
TX -
RX +
RX -
Unused
Unused




Littelfuse

SRV05-4HTG Datasheet Preview

SRV05-4HTG Datasheet

TVS Diode Arrays

No Preview Available !

TVS Diode Arrays (SPA® Diodes)
Low Capacitance ESD Protection - SRV05 Series
Absolute Maximum Ratings
Symbol
IPP
PPK
TOP
TSTOR
Parameter
Peak Current (tp=8/20μs)1
Peak Pulse Power (tp=8/20μs)
Operating Temperature
Storage Temperature
Value
10
150
–40 to 125
–55 to 150
Units
A
W
°C
°C
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause
permanent damage to the device. This is a stress only rating and operation of the device
at these or any other conditions above those indicated in the operational sections of this
specification is not implied.
1Non-repetitive pulse per waveform on page 3
Thermal Information
Parameter
Storage Temperature Range
Maximum Junction Temperature
Maximum Lead Temperature
(Soldering 20-40s)
Electrical Characteristics (TOP=25ºC)
Parameter
Reverse Standoff Voltage
Reverse Voltage Drop
Reverse Leakage Current
Clamp Voltage1
Dynamic Resistance
ESD Withstand Voltage1
Diode Capacitance1
Diode Capacitance1
Symbol
VRWM
VR
ILEAK
VC
RDYN
VESD
CI/O-GND
CI/O-I/O
Test Conditions
IR ≤ 1µA
IR = 1mA
VR=5V
IPP=1A, tp=8/20µs, I/O to GND2
IPP=5A, tp=8/20µs, I/O to GND2
IPP=8A, tp=8/20µs, I/O to GND2
(VC2 - VC1) / (IPP2 - IPP1)
IEC61000-4-2 (Contact)
IEC61000-4-2 (Air)
Reverse Bias=0V
Reverse Bias=1.65V
Reverse Bias=0V
Notes: 1 Parameter is guaranteed by design and/or device characterization.
2 Repetitive pulse per waveform on page 3.
Min
±20
±30
Typ
8.0
0.1
8.8
11.5
13.2
0.7
2.4
2.0
1.2
Rating
–55 to 150
150
260
Units
°C
°C
°C
Max
6.0
0.5
10.0
13.0
15.0
3.0
Units
V
V
µA
V
V
V
Ω
kV
kV
pF
pF
pF
Clamping Voltage vs. IPP
20.0
18.0
16.0
14.0
12.0
10.0
8.0
6.0
4.0
2.0
0.0
1 2 3 4 5 6 7 8 9 10
Peak Pulse Current-IPP (A)
Product Characteristics
Lead Plating
Matte Tin
Lead Material
Lead Coplanarity
Substitute Material
Body Material
Flammability
Copper Alloy
0.0004 inches (0.102mm)
Silicon
Molded Epoxy
UL 94 V-0
Notes :
1. All dimensions are in millimeters
2. Dimensions include solder plating.
3. Dimensions are exclusive of mold flash & metal burr.
4. Blo is facing up for mold and facing down for trim/form, i.e. reverse trim/form.
5. Package surface matte finish VDI 11-13.
© 2017 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 02/23/17


Part Number SRV05-4HTG
Description TVS Diode Arrays
Maker Littelfuse
Total Page 4 Pages
PDF Download

SRV05-4HTG Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 SRV05-4HTG TVS Diode Arrays
Littelfuse
2 SRV05-4HTG-D 5V 10A TVS Diode Array
Littelfuse





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy