TPSMC47CA Datasheet | Littelfuse

Description The TPSMC series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features - High reliability application and - Fast response time: typically automotive grade AEC-Q101 qualified less than 1.0ps from 0V to VBR min - For surface mounted - Excellent clamping capability applications to optimize board - Low incremental surge space resistance - Low profile package - Typical failure mode is short - Typical IR less than 1µA above 13V from over-specified voltage or - High temperature soldering current guaranteed: 260°C/10 seconds - Whisker test is conducted at terminals based on JEDEC JESD201A per its table 4a and 4c - UL Recognized body that meets flammability rating V-0 - IEC 61000-4-2 ESD 30k V(Air), - Meet MSL level1, per 30k V (Contact) J-STD-020, high temperature - ESD protection of data lines in soldering guaranteed. accordance with IEC 61000-4-2 - EFT protection of data lines in accordance with IEC 61000-4-4 - Built-in strain relief - Matte tin lead- free plated - Halogen free and Ro HS pliant - Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is - VBR @TJ= VBR@25°C x (1+αT x (TJ - 25)) (αT:Temperature Coefficient) tin(Sn) (IPC/JEDEC J-STD609A.01) - UL Recognized to ANSI/UL - Glass passivated chip junction 497B: Protectors for Data - 1500W peak pulse power capability at 10/1000μs munications and Fire Alarm Circuits waveform, repetition rate (duty cycles):0.01% Applications TVS ponents are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circuits used in Tele, puter, Industrial and Consumer electronic applications. Functional Diagram Cathode Bi-directional Uni-directional Anode © 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised:...