datasheet4u.com

900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf





Luminus
Luminus

SSM-80 Datasheet Preview

SSM-80 Datasheet

LED

No Preview Available !

SSM-80 pdf
SSM-80 LEDs
SSM-80 Product Datasheet
Table of Contents
Technology Overview. . . . . . 2
Test Specifications . . . . . . . . . 2
White Binning Structure. . . . 3
Chromaticity Bins. . . . . . . . . . 4
Product Shipping &
Labeling Information. . . . . . . 6
Electrical Characteristics. . . 7
Spectral Characteristics. . . . .8
Radiation Patterns . . . . . . . . . 8
Thermal Resistance . . . . . . . . 9
Mechanical Dimensions . . . 10
Solder Profile . . . . . . . . . . . . . 12
Tape & Reel Drawing . . . . . . 13
Ordering Information . . . . . 14
Features:
3000K Efficacy over 100 lm/W, Flux over 1,600 lumens
High density small form-factor light source ideal for spot and directional applications
ANSI compatible flux binning
Low thermal resistance: 1.0 °C/W
Lumen maintenance of greater than 70% after 60,000 hours
RoHS compliant
High reliability
Electrically isolated thermal path
13V typical input voltage
Narrow beam focus, MR-16 form factor
Applications
Indoor Lighting
Directional spot
MR-16 light engine
Track Lighting
High-Output Area Lighting
1
PDS-001674 Rev 08
© 2011 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc. T 978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821



Luminus
Luminus

SSM-80 Datasheet Preview

SSM-80 Datasheet

LED

No Preview Available !

SSM-80 pdf
SSM-80 Product Datasheet
Technology Overview
Luminus Big Chip LEDs™ benefit from a suite of innovations in the fields of chip technology, packaging and thermal management. These
breakthroughs allow illumination engineers and designers to achieve solutions that are high brightness and high efficiency.
Photonic Lattice Technology
Luminus’photonic lattice technology enables large area LED
chips with uniform brightness over the entire LED chip surface.
The optical power and brightness produced by these large
monolithic chips enable solutions which replace arc and
halogen lamps where arrays of traditional high power LEDs
cannot.
For red, green and blue LEDs, the photonic lattice structures
extract more light and create radiation patterns that are more
collimated than traditional LEDs. Having higher collimation
from the source increases optical collection efficiencies and
simplifies optical designs.
Packaging Technology
temperature, thereby resulting in brighter solutions and longer
lifetimes. The package is easy to use, and ready to be mounted
in the lighting system.
Reliability
Designed from the ground up, Luminus Big Chip LEDs are one of
the most reliable light sources in the world today. Big Chip LEDs
have passed a rigorous suite of environmental and mechanical
stress tests, including mechanical shock, vibration, temperature
cycling and humidity, and have been fully qualified for use in
extreme high power and high current applications. With very
low failure rates and median lifetimes that typically exceed
60,000 hours, Luminus Big Chip LEDs are ready for even the
most demanding applications.
Thermal management is critical in high power LED applications.
With a thermal resistance from junction to case of
1.0º C/W. Luminus SSM-80 package is designed with high
quality materials to provide customers with industry leading
package thermal conductivity. This allows the LED to be driven
at higher current densities while maintaining a low junction
Environmental Benefits
Luminus LEDs help reduce power consumption and the amount
of hazardous waste entering the environment. All Big Chip LED
products manufactured by Luminus are RoHS compliant and
free of hazardous materials, including lead and mercury.
Understanding Big Chip LED Test Specifications
Every Luminus LED is fully tested to ensure that it meets the high quality standards expected from Luminus’products.
Testing Temperature
Luminus core board products are typically measured in such a
way that the characteristics reported agree with how the
devices will actually perform when incorporated into a system.
This measurement is accomplished by mounting the devices on
a 40ºC heat sink and allowing the device to reach thermal
equilibrium while fully powered. Only after the device reaches
equilibrium are the measurements taken. This method of
measurement ensures that Luminus Big Chip LEDs perform in
the field just as they are specified.
Luminus surface mount LEDs are typically tested with a 20mSec
input pulse and a junction temperature of 25ºC. Expected flux
values in real world operation can be extrapolated based on the
information contained within this product data sheet.
Multiple Operating Points (0.7A, 1.4A, 2.0 A)
The tables on the following pages provide typical optical and
electrical characteristics. Since the LEDs can be operated over a
wide range of drive conditions (currents from less than 350mA
to 2.0 A, and duty cycle from <1% to 100%), multiple drive
conditions are listed.
SSM-80 LEDs are production tested at 1.4 A. The values shown at
0.7A and 2.0A are for additional reference at other possible drive
conditions.
2
PDS-001674 Rev 08
© 2011 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc. T 978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821


Part Number SSM-80
Description LED
Maker Luminus
Total Page 14 Pages
PDF Download
SSM-80 pdf
SSM-80 Datasheet PDF
[partsNo] view html
View PDF for Mobile








Similar Datasheet

1 SSM-80 LED Luminus
Luminus
SSM-80 pdf





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy