AM-180 / AMC-180
Cascadable Thin Film Amplifier,
10 dB Gain, 10 - 2000 MHz
+14 dBm Typical 1 dB Compression
5 dB Typical Noise Figure
1.4:1 Typical VSWR
M/A-COM’s AM-180 is a feedback amplifier with high
intercept and compression points. This amplifier is
packaged in a TO-8 package. Due to the internal
power dissipation the thermal rise should be
minimized. The ground plane on the PC board
should be configured to remove heat from under the
package. AM-180 is ideally suited for use where a
high intercept, high reliability amplifier is required.
Outline Drawing: TO-8-1 *
4X Ø .018+/-.005
WEIGHT (APPROX) 0.10 OUNCES 2.8 GRAMS
Absolute Maximum Ratings 1
Outline Drawing: SMA Connectorized *
Max. Input Power
-55°C to +85°C
-65°C to +125°C
1. Operation of this device above any one of these parameters
may cause permanent damage.
Dimensions are inches (millimeters) ±0.015 (0.38) unless otherwise specified.
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
For further information and support please visit: