900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






MA-COM

MASW-008543 Datasheet Preview

MASW-008543 Datasheet

SPDT High Isolation Terminated Switch

No Preview Available !

MASW-008543
SPDT High Isolation Terminated Switch
0.01- 4.0 GHz
Features
Positive Voltage Control
High Isolation:
62 dB @ 1 GHz
65 dB @ 2 GHz
Low Insertion Loss:
0.65 dB @ 1 GHz
0.70 dB @ 2 GHz
50 Ω Internal Terminations
Fast Settling for Low Gate Lag requirements
Lead-Free MSOP-8-EP Package
Halogen-Free “Green” Mold Compound
RoHS* Compliant and 260°C Reflow Compatible
Description
The MASW-008543 GaAs monolithic switch
provides high isolation in a lead-free, plastic surface
mount package. This device is ideal for applications
across a broad range of frequencies.
MACOM fabricates the MASW-008543 using a
0.5-micron gate length pHEMT process. The
process features full chip passivation for
performance and reliability.
Ordering Information1,2
Part Number
Package
MASW-008543-000000
Bulk Packaging
MASW-008543-TR3000
3000 piece reel
MASW-008543-001SMB
Sample Board
1. Reference Application Note M513 for reel size information.
2. All sample boards include 5 loose parts.
Functional Block Diagram
Pin 1
1
2
3
4
Rev. V3
8
7
6
5
Pin Configuration3
Pin Function Pin Function
1 V1 5 RF Port 2
2 V2 6 Ground
3 RF Common 7
Ground
4 Ground 8 RF Port 1
3. The exposed pad centered on the package bottom must be
connected to RF and DC ground.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
* Restrictions on Hazardous Substances, European Union Directive 2011/65/EU.
1
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport




MA-COM

MASW-008543 Datasheet Preview

MASW-008543 Datasheet

SPDT High Isolation Terminated Switch

No Preview Available !

MASW-008543
SPDT High Isolation Terminated Switch
0.01- 4.0 GHz
Electrical Specifications4: TA = 25°C, VHIGH = 3 V, VLOW = 0 V, Z0 = 50
Parameter
Insertion Loss
Isolation
Test Conditions
1.0 GHz
2.0 GHz
3.0 GHz
4.0 GHz
1.0 GHz
2.0 GHz
3.0 GHz
4.0 GHz
Units
Min.
dB
dB
62
Return Loss
0.5 - 4.0 GHz
dB
Input IP3
P1dB
P0.1dB
TRISE, TFALL
TON, TOFF
2-Tone, 2.1 GHz, 10 MHz spacing
2.1 GHz, VHIGH = 3 V
2.1 GHz, VHIGH = 5 V
2.1 GHz, VHIGH = 3 V
2.1 GHz, VHIGH = 5 V
10% to 90% RF & 90% to 10% RF
50% of VC to 10% / 90% RF
dBm
dBm
dBm
ns
ns
Transients
In-band
mV
Control Current
- µA —
4. External DC blocking capacitors are required on all RF ports (39 pF capacitors are recommended).
Typ.
0.65
0.70
0.85
1.10
62
65
50
45
20
53
25
30
20
25
30
52
12
<1
Rev. V3
Max.
0.95
5
Absolute Maximum Ratings5,6
Parameter
Input Power, VHIGH = 3 V
(0.5 - 3.0 GHz)
Operating Voltage
Operating Temperature
Storage Temperature
Absolute Maximum
33 dBm
8V
-40°C to +85°C
-65°C to +150°C
5. Exceeding any one or combination of these limits may cause
permanent damage to this device.
6. MACOM does not recommend sustained operation near these
survivability limits.
Truth Table7,8,9
V1 V2 RFC-RF1 RFC-RF2
VHIGH
VLOW
On
Off
VLOW
VHIGH
Off
On
7. VLOW = 0 V ± 0.2 V, VHIGH = 1.8 V to +5 V, minimum VHIgh -
VLOw = 1.8 V, maximum VHIgh - VLOw = 8.0 V.
8. For use at low voltage, MACOM recommends connecting a
20K pull up resistor on pin 3 to a voltage equal to the most
positive control voltage.
9. Negative control voltage may be used. The VHIGH in the table
would be the most positive (0 V) and the VLOw would be the
most negative (-3 V for example).
2
M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macomtech.com for additional data sheets and product information.
For further information and support please visit:
https://www.macomtech.com/content/customersupport


Part Number MASW-008543
Description SPDT High Isolation Terminated Switch
Maker MA-COM
PDF Download

MASW-008543 Datasheet PDF






Similar Datasheet

1 MASW-008543 SPDT High Isolation Terminated Switch
MA-COM





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy