Datasheet4U Logo Datasheet4U.com

AT-106-PIN - Digital Attenuator

Datasheet Summary

Description

M/A-COM’s AT-106-PIN is a GaAs FET 6-bit digital attenuator with a 1 dB minimum step size and 50 dB total attenuation.

This attenuator and integral TTL driver is in a hermetically sealed ceramic 24-lead surface mount package.

Features

  • Attenuation: 1 dB steps to 50 dB.
  • Temperature Stability: ± 0.18 dB from.
  • 55°C to +85°C Typical.
  • Low DC Power Consumption.
  • Hermetic Surface Mount Package.
  • Integral TTL Driver.
  • 50 Ohm Nominal Impedance.
  • Lead-Free CR-13 Package.
  • 260°C Reflow Compatible.
  • RoHS.
  • Compliant.

📥 Download Datasheet

Datasheet preview – AT-106-PIN

Datasheet Details

Part number AT-106-PIN
Manufacturer MACOM
File Size 632.63 KB
Description Digital Attenuator
Datasheet download datasheet AT-106-PIN Datasheet
Additional preview pages of the AT-106-PIN datasheet.

📁 Similar Datasheet

  • AT-106 - Digital Attenuator (Tyco Electronics)
  • AT-10650-3 - General Purpose Gallium Arsenide FET (HP)
  • AT-103 - 5-Bit Digital Attenuator (Tyco Electronics)
  • AT-107 - Digital Attenuator (Tyco Electronics)
  • AT-108 - Voltage Variable Absorptive Attenuator (Tyco Electronics)
  • AT-109 - Voltage Variable Absorptive Attenuator (Tyco Electronics)
  • AT-110 - Voltage Variable Absorptive Attenuator (Tyco Electronics)
  • AT-1104NC - CCFL BACKLIGHT INVERTER (PIS)
  • AT-113 - 3 Volt Voltage Variable Absorptive Attenuator (Tyco Electronics)
  • AT-118 - Voltage Variable Absorptive Attenuator (Tyco Electronics)
Other Datasheets by MACOM

Full PDF Text Transcription

Click to expand full text
AT-106-PIN Digital Attenuator 50.0 dB, 6-Bit, TTL Driver, DC-2.0 GHz Features  Attenuation: 1 dB steps to 50 dB  Temperature Stability: ± 0.18 dB from –55°C to +85°C Typical  Low DC Power Consumption  Hermetic Surface Mount Package  Integral TTL Driver  50 Ohm Nominal Impedance  Lead-Free CR-13 Package  260°C Reflow Compatible  RoHS* Compliant Description M/A-COM’s AT-106-PIN is a GaAs FET 6-bit digital attenuator with a 1 dB minimum step size and 50 dB total attenuation. This attenuator and integral TTL driver is in a hermetically sealed ceramic 24-lead surface mount package. The AT-106-PIN is ideally suited for use where accuracy, fast switching, very low power consumption and low intermodulation products are required.
Published: |