MA4M1050 Datasheet | MACOM Technology Solutions

Features - Excellent Repeatability ( Wafer-to-Wafer and Lot-to-Lot) - Small Size - Low Loss, High Q - Available with Round or Square Bond Pads Case Style Description and Applications The 4M series of MNS (metal-nitride-silicon) chip capacitors is designed specifically for high reliability and repeatable performance in microwave circuit applications. These capacitors are made using a low pressure chemical vapor deposition (LPCVD) that results in dense, uniform nitride layers. These devices exhibit higher capacitance per unit area (resulting in smaller chip size) and improved ruggedness over similar MOS, MIS and ceramic capacitors. Evaporated gold contacts are used to provide an easily bondable metal pad on the capacitor chip. M/A- MNS capacitors have shown no measurable capacitance change when subjected to the rated standoff voltage at 150 Degrees C. The MA4M series of chip capacitors is an excellent choice for use in hybrid microwave circuits up through Ku-band, where low loss, high reliability, small size and temperature stability are prime concerns. These chip capacitors are suited for applications requiring DC blocks, coupling capacitors, bypass capacitors, capacitive loads and tuning elements in oscillators, multipliers and filters. Rev. V6 parison of M/A- MNS Capacitors to Ceramic Chip Capacitors Characteristics pared Operating Temperature Range Temperature Coefficient Insertion Loss of a 20 pf Capacitor in a 50 Ohm Line @ 15 GHz Chip Size 200 p F, 100V 20 p F, 100V MNS -55 Deg C. to + 200 Deg. C. 180 PPM .1 d B Ceramic -55 Deg C. to + 200 Deg. C. 1000 PPM .2 d B 40 x 40 mils 22 x 22 mils 70 x 70 mils 50 x 50 mils M/A- Technology Solutions Inc. (MA) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit .ma. for additional data sheets and product information. For further information and support please visit: https://.ma./support MA4Mxxxx Series MNS Microwave Chip Capacitors Specif...