Datasheet4U Logo Datasheet4U.com

MAS9276 - IC for 10.00 - 30.00 MHz VCTCXO

Description

MAS9276 is integrated circuit well suited to build VCTCXO for mobile communications.

Temperature calibration is achieved at three calibration temperatures only.

The trimming is done through a serial bus and the calibration information is stored in an internal PROM.

Features

  • Very small size Minimal current consumption Wide operating temperature range Phase noise.

📥 Download Datasheet

Datasheet Details

Part number MAS9276
Manufacturer MAS
File Size 151.11 KB
Description IC for 10.00 - 30.00 MHz VCTCXO
Datasheet download datasheet MAS9276 Datasheet

📁 Similar Datasheet

  • MAS9251 - REGULATED CHARGE PUMP DC/DC CONVERTER (ETC)
  • MAS9011 - Solar Cell Systems Manager IC (Micro Analog Systems)
  • MAS9078 - Stand-alone am Receiver ic (Micro Analog Systems)
  • MAS9079 - Stand-alone Tri Band Time Signal AM Receiver IC (Micro Analog Systems)
  • MAS9081 - Stand-alone Dual Band Time Signal AM Receiver IC (Micro Analog Systems)
  • MAS9090B - Low Voltage 14-bit Linear Codec (Micro Analog Systems)
  • MAS9171A - Octal Port Protecton (Micro Analog Systems)
  • MAS9181B - OCTAL 8 BIT TRIMMER IC (ETC)
  • MAS9181BN - OCTAL 8 BIT TRIMMER IC (ETC)
  • MAS9181CS - OCTAL 8 BIT TRIMMER IC (ETC)
Other Datasheets by MAS
  • MAS9270 - IC FOR 10.00 - 30.00 MHz VCTCXO
  • MAS9271 - IC FOR 10.00 - 40.00 MHz PXO
  • MAS9275 - IC FOR 10.00 - 36.00 MHz VCXO
  • MAS9278 - IC for 10.00 - 30.00 MHz VCXO
  • MAS9279 - IC FOR 10.00 - 52.00 MHz VCTCXO
  • MAS9280 - IC FOR 18.00 - 40.00 MHz VCTCXO
  • MAS9281 - IC FOR 10.00 - 60.00 MHz XO
  • MAS9283 - IC FOR 10.00 - 56.00 MHz VCXO

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DA9276.003 13 July, 2006 MAS9276 IC for 10.00 – 30.00 MHz VCTCXO • • • • • • DESCRIPTION MAS9276 is integrated circuit well suited to build VCTCXO for mobile communications. Temperature calibration is achieved at three calibration temperatures only. The trimming is done through a serial bus and the calibration information is stored in an internal PROM. This means that no rework for trimming is needed. To build a VCTCXO only a crystal is required in addition to MAS9276. The compensation method is fully analog, working continuously without generating any steps or other interference.
Published: |