Datasheet4U Logo Datasheet4U.com

MXL101SF - DVB-T INTEGRATED RECEIVER

General Description

The MxL101SF is a single-chip integrated tuner and demodulator receiver IC.

It meets the specifications of digital DVB-T TV standards (NorDig Unified 2.0, MBRAI and DTG).

The MxL101SF has a built-in I2C interface.

Key Features

  • (Tuner-Demod Mode).
  • Tuning range from 104 to 862 MHz NorDig 2.0 and MBRAI compliant No external LNA required Single LNA input pin for all bands Integrated channel filtering requiring no external SAW filters Programmable channel bandwidths of 6, 7, or 8MHz Automatic channel mode detection and fast locking time Dual supply of 3.3V and 1.8V operation using on-chip regulators It can also use an additional external 1.2V supply for l.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MXL1013 Dual/Quad Precision Op Amps Maxim
MXL1014 Dual/Quad Precision Op Amps Maxim
MXL1016 Ultra-Fast Precision TTL Comparators Maxim
MXL1001 Precision Operational Amplifier Maxim
MXL1007 Low-Noise / Precision Op Amp Maxim

Other Datasheets by MaxLinear

Part Number Description
MxL201RF Digital Cable Tuner
MXL214C Full Spectrum Capture Cable Receiver SoC
MXL241SF CABLE INTEGRATED RECEIVER
MXL301RF SILICON IC TUNER
MXL5003S DIGITAL SILICON IC TUNER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MXL101SF DATASHEET REV. 2.2 MAXLINEAR MXL101SF DVB-T INTEGRATED RECEIVER General Description The MxL101SF is a single-chip integrated tuner and demodulator receiver IC. It meets the specifications of digital DVB-T TV standards (NorDig Unified 2.0, MBRAI and DTG). The MxL101SF has a built-in I2C interface. It enables the implementation of DVB-T receiver functionality in a very small footprint with low BOM cost and low power consumption. The MxL101SF can be configured into either Tuner-Demod or Tuner mode. In Tuner-Demod mode, the on-chip demodulator is activated to output MPEG-2 TS data. In tuner mode, the tuner outputs an analog IF signal. Gain control, LO generation, and channel selectivity functions are completely integrated on the chip, which simplifies board-level design.