SINGLE-PHASE BRIDGE RECTIFIER
KBPC25005 THRU KBPC2510
MB2505 THRU MB2510
This series is UL recognized
High forward surge current capability
Low thermal resistance.
High isolation voltage from case to lugs.
High temperature soldering guaranteed:
260 /10 second, at 5 lbs. (2.3kg) tension.
Case: Matel case.
Terminal: Plated 0.25" (6.35mm) lug.
Polarity: Polarity symbols marked on case.
Mounting: Thru hole for #10 screw, 20 in,- lbs. Torqute Max.
Weight:1.02 ounce, 29gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load derate current by 20%
50 to 1000 Volts
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Output
Current, at TC = 50 (Note 1, 2)
Peak Forward Surge Current
8.3ms single half sine - wave superimposed on
rated load (JEDEC method )
Rating for Fusing (t<8.3ms)
Maximum Instantaneous Forward Voltage Drop
per bridge element at 12.5A
Maximum DC Reverse Current at ratedTA = 25
DC blocking voltage per element TA
Isolation Voltage from case to lugs
Typical Thermal Resistance (Note 1,2)
Operating Temperature Range
Storage Temperature Range
KBPC KBPC KBPC KBPC KBPC KBPC KBPC
SYMBOLS 2505 2501 2502 2504 2506 2508 2510 UNIT
MB2505 MB251 MB252 MB254 MB256 MB258 MB2510
(-65 to +150)
(-65 to +150)
1. Unit mounted on 5" X 6" X 4.9" (12.8cm X 15.2cm X 12.4cm)Al. finned Plate.
2. Bolt down on heat-sink with silicon thermal compound between bridge and mounting sutfae for maximum heat
transfer efficiency with # 10 screw.